How to operate benchtop wire terminator crimping machine?
By: Shenzhen Fortune Sky Technology Co.,Ltd
When using the automatic wire crimping machine, we must follow the correct use steps. In the process of work, if there are abnormal conditions, the staff should not be panic. The first reaction is to cut off the power supply, and then ask professional maintenance personnel to check and repair it. The repairman must be professional, and the general people are not allowed to disassemble the automatic terminal machine at will, because the internal parts of this kind of mechanical equipment are very fine, and it is possible to install it after disassembly.
Some parts of the fully automatic wire crimping machine are very sharp, especially the automatic stripping position, where should never be near before the power is cut off. After each job is completed, the power supply should be disconnected before leaving the job. When a batch of terminals are processed and need to be replaced, the power must be cut off first, and then replaced. It can not be replaced in order to save time. If the wire is stuck in the die during the working process, special tools are needed to clear the wire before continuing to work.
Instructions for proper operation of wire crimping machine:
When we are processing wires, it is very troublesome to rely on manual work, so some people invented some machines that can help us to process wires. The automatic wire crimping machine is one of them. Using wire crimping machine to help us process wires can simplify our operation, make the processed wires more in line with the specifications, and also improve the efficiency of wire processing, but when using wire crimping machine, we need standardized operation.
During the operation of the wire crimping machine, someone must supervise it. If the automatic wire crimping machine fails, we should turn off the power first, and then check the wire crimping machine. If it is a common problem, you can handle it well, otherwise you should ask professional maintenance personnel to repair it.
When problems arise in fully automatic wire crimping machine, if external problems can be solved by themselves, but if parts are designed into them, they need to be disassembled to repair them. At this time, professionals should be invited to deal with them. Generally, unspecified personnel and non-professional personnel are not allowed to disassemble privately.
When the terminal is disconnected from the power supply, if it has not stopped turning, it is also not allowed to enter the stamping range of human body parts, including fingers, which may be dangerous. When we are working, when we need to change the wire crimping machine, we should first disconnect the power supply, then replace the fully automatic wire crimping machine and the operation. It is not allowed to change the wire crimping machine when it is running. It is dangerous.
Shenzhen Fortune Sky Technology Co.,Ltd