Introduction to the Silent Terminal Crimping Machine Control Panel

DONG GUAN, China - Sept. 25, 2025 - PRLog -- The Silent Terminal Crimping Machine is an efficient tool for wire processing, and understanding its control panel is essential for safe and effective operation. This guide breaks down the functions of the console buttons and outlines critical operating procedures.

I. Control Console Functions and Operation
Power Management and Initial Setup
The central control is the Main Power Switch. When the prominent red button is fully depressed to the "Off" position, the entire system is de-energized, immediately halting all machine activity. Conversely, positioning the button to the "On" state applies power to the machine, initiates the motor's operation, and activates the timer display, which will show a numerical value.

A separate button manages the work light. With the main power on, a press of this button activates the integrated illumination, which is essential for providing sufficient visibility for secure and precise operation. A subsequent press will turn the light off.

Operational Modes and Counter Reset
The "Reset" button serves a dual purpose. Holding this button for approximately three seconds will clear the machine's internal counter, returning it to zero. A simple press of the same button toggles the machine between Manual and Automatic modes.

Automatic Mode (Green Light On): When the green indicator light is illuminated, the machine is in its standard operating mode. In this state, the crimping function is solely controlled by the footswitch mechanism.

Manual Mode (Red Light On): When the red indicator light is on, the footswitch is deactivated. This mode is specifically used for machine maintenance and adjustment. The operator must use the dedicated up and down buttons on the panel to inch the motor for precise die adjustments. It is paramount that all die adjustments are conducted only while the machine is in Manual Mode to ensure safety and prevent damage.

Advanced Settings: Crimping Parameters
The machine offers customizable crimping parameters, accessed by pressing and holding a dedicated button for three seconds to enter the setting mode:

Do you have any questions about a specific setting or mode of operation?

https://www.fortunesky-tech.com/operation-of-terminal-cri...
https://www.fortunesky-tech.com/products/versatile-wire-t...