Techno CNC Router Special - Used LC 4896 CNC Router Made in USA

RONKONKOMA, N.Y. - March 28, 2016 - PRLog -- • X-Axis Travel = 50.0"
• Y-Axis Travel = 96.0"
• Z-Axis Travel = 5.0"
• System Power requirements = 110V
• Includes: Tool calibration touch pad.
• Drive System: Balls Screws on X,Y, and Z axes with anti-backlash ball nuts.
• Drive System is closed loop DC servo control. Comes complete with servo control card and windows based user friendly software interface.
• Repeatability: .001 inches
• Max. speed: 250 in/min
• Control voltage full load amperage = 6.3amps
• Dimensions: L132"xW80"xH70" (Approx 1500lbs)
• Spindle 4 HP HSD Router Set with (220V, 3-phase)6000-18000RPM
• Includes Vacuum Hood, collet wrenches, 1/8", 1/4", 3/8", and
• 1/2" ER25 collets, and cover nut.
• Full load amperage = 13.3amps
• 5-Zone Vacuum t-slot Table for Model 4896 LC Series
• Pump 8.8HP (6.6kw) Rotary vane vacuum pump (3-phase)
Specs: 173 CFM, 25Hg vacuum, 81db
208-230/460 Volt +/- 10%
AMPS: 208V-27.4a, 230V-25.4a, 460V-12.7a
Includes: motor start, coil, and CNC connections

For this special, please visit http://www.technocnc.com/cnc-router-systems/deals.htm.