Click to Share
 

Filter News
Show All Results
News By Country
United States Remove
-New York Remove
--Ronkonkoma Remove
News By Industry
News By Tag
News By Subject


January 2022
FrThWeTuMoSuSa
21201918171615

Public Company News

Business Press Releases

Ronkonkoma Latest News (New York, United States)

+ Alert
+ Feed
Exclusive News
Topics Locations Industries Dates

90 views, By UltraFlex Power Technologies
By using induction heating for this shrink-fitting process, the customer could achieve high-quality and repeatable results, with short heat cycle times that would allow him to increase the productivity.
97 views, By UltraFlex Power Technologies
This customer-requested demonstration proved that by using induction to braze the copper assemblies, the customer would achieve consistent and repeatable results, with high energy- and cost-efficiency of the brazing process.
136 views, By UltraFlex Power Technologies
Due to the reduced induction heating cycle, productivity could be increased, with no dependency on the operator skills.
132 views, By UltraFlex Power Technologies
The test applications set up by UltraFlex proved the possibility to use induction heating to efficiently braze parts of different size and material.
179 views, By UltraFlex Power Technologies
This demonstration proved that the customer could successfully replace torch brazing with induction brazing. He could also take advantage of automation to increase his productivity rates and achieve consistent and high-quality brazing results.
172 views, By UltraFlex Power Technologies
The preheating process for each of the samples was successfully completed, with high energy- and cost-efficiency. Thanks to the lack of open flame, the preheating was a completely safe operation that did not require any specific environment.
209 views, By UltraFlex Power Technologies
The demo not only proved the possibility to heat all wire samples using induction, but also showed the time- and energy-efficiency of the process, which would allow to easily reach the predefined target productivity rates.
173 views, By UltraFlex Power Technologies
Thanks to the improved timing and energy efficiency for this heating process, the customer would achieve better productivity rates while at the same time benefiting from significantly reduced energy consumption.
223 views, By UltraFlex Power Technologies
The efficient usage of induction heaters for fast preheating to 1742°F/950°C of steel shovel molds has recently been demonstrated by UltraFlex Power Technologies.
143 views, By UltraFlex Power Technologies
By using induction, the customer would achieve a much improved time- an energy-efficiency for this annealing process and also ensure high-quality and repeatable results, independent of the operator skills.
265 views, By UltraFlex Power Technologies
By replacing torch-based brazing with induction brazing, the customer would not only achieve a time- and energy-efficient brazing process and increased productivity; he would ensure a process that is safe both for the operator and the environment.
324 views, By UltraFlex Power Technologies
The demonstration performed by UltraFlex showed how a specific and commonly challenging soldering process can be accomplished in a much more efficient manner using induction heating.
309 views, By UltraFlex Power Technologies
When used on the line, this induction de-brazing process would ensure time- and cost-efficient tip removal, resulting in higher productivity and lower costs compared to torch-debrazing.
318 views, By Ultrasound Solutions Corp.
As a key player in the X-ray equipment and service space, Hi-Tech Medical Imaging's products are a complement to Ultrasound Solutions Corp's current imaging equipment portfolio.
170 views, By UltraFlex Power Technologies
At power output of 7.5 kW, the target brazing temperature of 1500°F (815°C) had been reached, for each of the assemblies, within a fraction of the time needed when torch brazing is used.
298 views, By UltraFlex Power Technologies
The time- and cost-efficient susceptor induction heating of bundled wires for a customer in the Oil & Gas industry has recently been demonstrated by UltraFlex Power Technologies.
274 views, By UltraFlex Power Technologies
By using induction, the customer would achieve a significant cut on the brazing time, far beyond the one targeted, which would enable higher productivity rates.
154 views, By UltraFlex Power Technologies
The induction soldering process required no specific environment, and guaranteed high-quality result, with no dependency on the operator skills.
304 views, By UltraFlex Power Technologies
Thanks to the automated heating and temperature control, this induction curing process ensured consistent, controlled and reliable curing results, totally independent of the operator skills.
361 views, By UltraFlex Power Technologies
By using induction-based curing for this process and thanks to the precise, digital control on the temperature of the heated parts, the manufacturer would achieve a time- and cost-efficient process that would ensure no damage to the paint.
345 views, By UltraFlex Power Technologies
By replacing the existing soldering process with induction soldering, the customer would achieve improved cycle times and increased productivity.
185 views, By UltraFlex Power Technologies
By replacing traditional brazing methods with induction brazing, the UltraFlex customer would achieve excellent, repeatable brazing results at a fraction of the usual brazing time and energy cost.
185 views, By UltraFlex Power Technologies
In addition to being time-efficient, this induction soldering was also reliable, energy-efficient and completely safe for the operator. When used on the line, it would ensure consistent and repeatable results every time.
180 views, By UltraFlex Power Technologies
This induction brazing demo application proved that brazing with induction heating would ensure a much higher joint quality, guaranteed repeatability of the results, precise temperature control and energy efficiency.
206 views, By UltraFlex Power Technologies
Besides being a time- and cost-efficient process, induction soldering would guarantee the customer consistent, repeatable results every time, regardless of the operator skills.
215 views, By UltraFlex Power Technologies
This demo scenario proved that induction-based brazing is more time- and cost-efficient compared to torch-based brazing. Thanks to the ability to program UltraFlex induction heating equipment, the customer could achieve consistent, repeatable results
177 views, By UltraFlex Power Technologies
This demo scenario set up by UltraFlex proved the significant efficiency of induction soldering - time- and cost-wise.
196 views, By UltraFlex Power Technologies
If used on the production line, induction brazing would ensure fast heating cycles and consistent results, without the need for batch processing.
169 views, By UltraFlex Power Technologies
Apart from being a super fast and clean process with high-quality results, this induction brazing process was also energy-efficient, with up to 90% of the energy being converted into heat in the part.
181 views, By UltraFlex Power Technologies
In a recent test application set up for demonstration purposes, UltraFlex proved the energy- and cost- efficiency of induction heating for a steel cylinder, prior to using it for epoxy curing.
194 views, By UltraFlex Power Technologies
Thе test scenario had been set up per request of a potential customer from the HVAC industry looking to replace torch heating in their manufacturing process to eliminate defects in the produce and improve the operator safety

Page: 1 2 NextPage updated every 30 minutes


Like PRLog?
9K2K1K
Click to Share