8TR8223 RFIC Front-end Module for IoT and ZigBee/THREAD/Matter/Proprietary ISM Applications

SANTA ANA, Calif. - Aug. 8, 2025 - PRLog -- SANTA ANA, Calif. – Today BeRex Inc. announces the availability of the 8TR8223, a multi-function front-end RFIC module designed for 802.15.4 ZigBee, THREAD,  Matter, and proprietary ISM applications.

The 8TR8223 combine a power amplifier for transmission with a low-noise amplifier for the receiver, a pair of SP3T (single-pole triple-throw) switches for transmit/receive/bypass functionality, dual ANT, along with a filter network and 50-ohm input and output matching circuitry. All of these are packaged in a compact 3.0 mm x 3.0 mm x 0.45 mm 16-pin QFN package.

The 8TR8223 offer cutting-edge technology, providing up to +22 dBm saturated output power, 10.7dBm EDR Spectral Mask at 8-DPSK with 3-DH5 packets at 3Mbps, and ultra-low noise figures of 1.92dB to 2.13dB. This device can operate with a wide voltage range from 2.2V to 3.8V and an operating temperature range from -40°C to +125°C. Its enhanced energy efficiency makes them ideal for battery operation.

Key features

• Frequency band: 2.4GHz to 2.485GHz
• Transmit Saturated Output Power / 2^nd ,3^rd Harmonics
• 22dBm(3.3V,153.5mA) / -24.5dBm/MHz,-12.8dBm/MHz+19.5dBm)
• Receiver Noise Figure
• 1.92dB(High Current Mode,12.6mA), 2.13dB(Low Current Mode, 6mA)
• Gain
• 23.4 dB (Tx Large-Signal), 18.8dB/16.5(Rx Small-Signal, High Current Mode/Low Current Mode)
• Transmit EDR Spectral Mask
• 10.7dBm at 2441MHz, 8-DPSK with 3-DH5 packets
• Data rate: 3Mbps, Spectral Mask compliant
• Bypass Mode: 2.38 dB (Insertion Loss), 4.2uA(Current)
• Recommended Operating Conditions
• 2.2V~3.8V(Supply Voltage), -40℃~+125℃(Operating Temperature)

Pricing and Availability

The 8TR8223 is currently available and are competitively priced. Samples are available upon request. Datasheets and additional information about these and other BeRex RF products are available on the company website: www.berex.com

About BeRex

BeRex, Inc., located in Santa Ana, CA, USA, is an independent, wholly-owned subsidiary of BeRex Corp. We specialize in RFIC Front-End Modules for Internet-of-Things (IoT) wireless devices, utilizing popular wireless communication protocols and standards.

Founded in 2004, BeRex leverages almost two decades of experience and expertise in developing the most reliable RF and Microwave components in the industry that enable the efficient transmission of voice, video, and data traffic over leading communications networks worldwide.