News By Tag
News By Location
Using Concrete Scanning Sydney for Construction Process and Excavation
By: Sure Search
Scanning a concrete as a process is a non-destructive method. Many engineers and project managers use and recommend this method because of the large number of benefits. There are many cases where excavation failures were caused. The reason was missing documents or data on the site. By scanning concrete structures, engineers get instant information about hidden objects in the concrete.
Most often, engineers have deadlines to follow. Besides acting on time, they need to calculate potential risks. That can be a long process, which adversely affects engineers. Concrete scanning provides fast and precise information. When the engineer has accurate information, he will make sure the construction process will be finished on time with minimal risk. Priority in the construction industry is to execute processes with minimum risks. Before starting excavation, unnecessary problems are avoided with concrete x ray.
If the construction process requires digging or drilling at any level, the risks of damaging the surrounding buildings or the workers' life are almost zero. Instead of digging without a plan, the worker will know where to perform digging. In case of damage, the whole process suffers timely and financially. To avoid additional costs, delaying the process and risking the lives of workers, you need to engage a company which provides concrete scanning services (https://suresearch.com.au/
To determine the location, position or depth of underground objects, a professional company utilizes Ground Penetrating Radar (GPR). GPR can produce an accurate picture of the area under the ground. This technique is very convenient for existing buildings that already have installed plumbing pipes or electrical cables. The goal is not to hit these utilities as they would cause more damage. Another benefit of having a scan with GPR gets before starting a process of concrete cutting, core drilling or wall sawing.
GPR or Concrete X-Ray works as follows: radio waves from underground objects are transmitted to the surface at varying frequencies. The average frequency for underground location is 450Mhz. Radio waves are sent to a computer to determine the location and depth of the utility. It can locate both metal and nonmetal objects and even void space.
Concrete scanning Sydney (https://suresearch.com.au/
1300 88 45 20