Follow on Google News News By Tag Industry News News By Place Country(s) Industry News
Follow on Google News | How to do after car driving on the way encounter puddlesCar driving on the way encounter puddles,what shall we do to pretect our cars, safety through the puddles, or water enter your engine,intake valve,air filter.....
By: motor-tools.com After wading, should be immediately removed the moisture content of the brake pads, which is very important, especially drum brakes! Vehicle after wading lose braking, resulting in serious danger or accident. The specific operation is: low speed and at the same time to step on the gas and brakes (not kick the dual-use people can repeatedly hit the brakes, speed limits must be slow), and repeated several times, the heat generated by friction brake drums and brake pads evaporation draining water. Engine inlet is very, very serious problems, water may enter through the intake valve, from the air filter from the exhaust pipe into the can from the carburetor inlet. If your engine unfortunately water, keep in mind do not attempt to start the engine, otherwise the consequences could be: the important parts of the engine crankshaft, connecting rod deformation, jitter caused by automobile engines, serious broken parts, engine overhaul. (Note: water entering the engine, it is not like air is compressed into a predetermined ratio of the engine, the diesel vehicle compression ratio can be as high as 22:1, this is the case, the water equivalent of the hydraulic oil in the hydraulic machine, the equivalent of an iron engine running up and down movement of the piston in the cylinder body, to impact cylinder heads, pistons, piston pins, crankshaft, cylinder liners and other important parts).http://www.motor- Engine water can only be linked to the neutral trailers, must not Guadang towed or try to start the engine (not the movement of the piston in the cylinder), must open the engine cylinder head cleanup cylinder water into the repair shop. And professional mechanic use professional equipment detects crankshaft, connecting rod. Crankshaft connecting rod and other components even hundredths of a millimeter deformation will cause the engine running when the jitter. If you want to detect your car work in the day-to-day driving, you can use iobd [http://www.motor- End
Account Email Address Account Phone Number Disclaimer Report Abuse
|
|