Starter Kit for LPC1766 Cortex-M3 Processor

Feb. 24, 2010 - PRLog -- NXP LPC1766 Starter Kit contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications:
NXP LPC1766 ARM Cortex-M3 Board
Keil MDK-ARM Development Kit, 32K evaluation edition
Emlink for ARM - a high speed JTAG Emulator for ARM Cortex-M3 processors
Plenty of example programs, all in source code

NXP LPC1758 ARM Cortex-M3 Board:
Include one 2.4" TFT LCD (240*320)
NXP LPC1766 processor, based on ARM Cortex-M3 Core, 100MHz
256KB internal flash and 64KB SRAM
XTAL Frequency: 12 MHz
Two RS232 Interfaces
Two CAN Interfaces
One 10/100M Ethernet Interface
One ETM Interface
One Micro SD Card Interface
One USB Device Interface
One USB Host Interface
One USB OTG Interface
One 20pins JTAG Interface
One 10pins Cortex Debug Interface
One 18pins Cortex Debug Interface
One TFT LCD Interface
One Joystick with 4-direction control and selector
One Analog Output (connected to speaker by default)
One Analog Input (connected to potentiometer by default)
Supply Voltage: 5V DC (provided by the USB bus of a PC)
Supply Current: 65mA typical, 120mA maximum
Board Size: 119mm x 119mm (4.68" x 4.68")
Click here to find more information about this NXP LPC1766 Cortex-M3 Board.

Keil MDK-ARM Development Kit
µVision IDE, debugger and simulation environment
ARM industry-leading C/C++ compiler from ARM
MicroLib highly optimized run-time library
Real-Time Trace for Cortex-M3 processor based devices
Keil RTX - deterministic Real-Time Operating System
More information about Keil MDK-ARM could be found in Keil website: http://www.keil.com.

Emlink for ARM
Supports debugging with Realview MDK and EWARM
Supports ARM Cortex-M3 processors: STM32, LPC17XX, AT91SAM3UE, etc.
JTAG 20 pins connects to target
Supports hardware and software breakpoints
Supports USB port connecting to host PC
Downloads and debugs speed up to 250KBytes/s (about 1.5Mbps)
Integrates seamlessly into IAR Embedded Workbench and Keil RealView MDK
Click here to find more information about this JTAG Emulator.

More info: http://www.embedinfo.com/en/list.asp?id=65.

# # #

Embest CO., LIMITED, established in March of 2000, is a global provider of embedded hardware and software. Embest aims to help customers reduce time to market with improved quality by providing the most effective total solutions for the embedded industry.