Pentek Introduces New Series of Sentinel Intelligent Signal Scanning Recorders

*Automatically tune, detect and record signals of interest *Scan and search from 2 MHz to 6 GHz at 30 GHz/sec scan rate *Capture instantaneous RF signal bandwidths up to 40 MHz *3U – 6U 19-inch rackmount server chassis with hot-swappable HDDs *More
By: Pentek, Inc.
 
 
Pentek’s Talon Recorder for SIGINT, COMINT and ELINT Applications
Pentek’s Talon Recorder for SIGINT, COMINT and ELINT Applications
UPPER SADDLE RIVER, N.J. - Oct. 12, 2016 - PRLog -- Pentek, Inc., today announced a major addition to its popular family of Talon® signal recording and playback systems, the RTS 2620 6 GHz RF Sentinel Intelligent Signal Scanning rackmount recorder. The Talon RTS 2620 recorder is suitable for military, security and government intelligence (SIGINT, COMINT and ELINT) applications. The RTS 2620 is the first recorder to combine and exploit the power of a Pentek Talon recording system with a fully integrated signal scanner, RF tuner and RF upconverter.

A Pentek Model 78621 Cobalt® transceiver module serves as the data acquisition engine of the Talon RTS 2620. Its 200 MHz 16-bit A/D converter provides 86 dB of spurious-free dynamic range and 74 dB of SNR. A digital downconverter (DDC) provides frequency zooming for signal bandwidths as low as a few kHz. The Model 78621 is coupled to a 6 GHz RF tuner front end with excellent dynamic range across its entire spectrum.

Sentinel Intelligent Signal Scanning

The Sentinel recorder provides automated signal monitoring and detection. The user specifies a start and stop frequency for the scan, covering any range between 2 MHz and 6 GHz. The RF tuner and DDC step across the scan range in consecutive bands, each programmable up to 40 MHz in width. RF energy in each band is detected to create a waterfall spectrum display of the entire scan.

Any band can be selected for continuous real-time monitoring and/or recording. In addition to manual band selection, a recording can be automatically started during a scan by configuring signal strength threshold levels to trigger a recording of the detected band. Each recording captures an instantaneous bandwidth up to 40 MHz.

"The RTS 2620 takes our world-class Talon recorder product line to the next level of integration. The new Sentinel recorder makes it extremely easy to automatically detect very small signals across a very large spectrum, a prime imperative for our signal intelligence customers," said Rodger Hosking, vice-president of Pentek. "Not only can this new recorder help engineers in a lab record and analyze signals of interest, it can also be deployed in a war-fighting environment where enemy signals need to be detected or captured for tactical purposes," he added.

"Midwest Microwave Solutions is excited to be part of Pentek's announcement of the new Talon SIGINT recorders," said Phillip J. Rezin, president. He added, "Integrating our RF tuner as the front end of the new Sentinel recorder with new control and scanning capabilities creates a more integrated, more complete recorder and a more sophisticated solution for communications applications."

Ease of Operation

Sentinel recorders are built on a Windows 7 Professional workstation with an Intel Core i7 processor and provide both a GUI (graphical user interface) and API (Application Programmer's Interface) to control the system. Systems are fully supported with Pentek's SystemFlow® software for system control and turn-key operation. The SystemFlow software has been enhanced to include intelligent scanning and integrated control of the RF tuner and optional RF upconverter. The software provides a GUI with point-and-click configuration management and can store custom configurations for single-click setup. It also includes a virtual oscilloscope, spectrum analyzer and spectrogram to monitor signals before, during and after data collection.

Post processing and analysis software tools like Matlab can be installed directly on the Talon RTS 2620 platform. Data files are recorded to the Windows native NTFS file system, which allows operators immediate access to recordings without the need for any file format conversion.

Configuration Options and Pricing

Depending on storage requirements, the Talon RTS 2620 is configured in a 3U–6U 19" rackmountable chassis, with hot-swappable data drives, front panel USB ports and I/O connectors on the rear panel. The hot-swappable Hard Disk Drive (HDD) array is available in 2 to 192 TB configurations and supports RAID levels 0, 5, or 6.

Additional options include a 6 GHz RF upconverter to allow users to re-transmit recorded signals at the same RF frequency at which they were recorded, GPS time and position stamping and 10GbE or 40GbE offload facilities. Delivery is 10-12 weeks ARO for all models. For the latest pricing information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.

About Pentek

Pentek, an ISO 9001:2008 certified company, designs and manufactures innovative COTS and rugged DSP boards and system recorders for commercial, government and military systems, including radar, communications, defense, medical and industrial control applications. Pentek offers powerful VME, VPX, FMC, AMC, XMC, cPCI and PCIe boards for data acquisition, software radio and digital signal processing featuring high-performance FPGAs. Pentek's I/O includes A/Ds, D/As, RF downconverters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support. For more information about Pentek, Inc. please visit www.pentek.com.

###

Pentek, Cobalt, Sentinel, SystemFlow and Talon are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.

For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=211

Follow Pentek on LinkedIn

Follow Pentek on Twitter

Follow Pentek on Facebook

Follow Pentek on Instagram on your Smart Phone

Follow Pentek on YouTube

North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458. International Sales Contacts: For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.

Media Contact:

Barbara Stewart

Patterson & Associates

480-488-6909

barbara@patterson.com

Contact
Barbara Stewart
***@patterson.com
End
Source:Pentek, Inc.
Email:***@patterson.com Email Verified
Tags:Pentek
Industry:Computers
Location:Upper Saddle River - New Jersey - United States
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Patterson & Associates PRs
Trending News
Most Viewed
Top Daily News



Like PRLog?
9K2K1K
Click to Share