Follow on Google News News By Tag Industry News News By Location Country(s) Industry News
Follow on Google News | Pentek Introduces New Software Radio Modules With Texas Instruments ADC32RF45 A/D Converter*Two 14-bit A/Ds, up to 3 GSPS, with digital down converters (DDCs) *Two 16-bit D/As, up to 2.8 GSPS, with digital up converters (DUCs) *Complete 3U VPX or PCIe solution with Virtex-7 FPGA *More
By: Pentek, Inc. The Model 3320 FMC front end accepts two analog RF or IF inputs on front panel connectors into a Texas Instruments ADC32RF45 dual A/D converter with built-in multiband DDCs, setting a new benchmark for Pentek channel density and conversion speeds in a transceiver product. "High-performance transceiver products like the Pentek FlexorSet models require the high sample rate and dynamic range that TI's ADC32RF45 and the DAC39J84 offer," said Philip Pratt, High-Speed Products business development manager, Texas Instruments. "The combination of TI's 14-bit, 3 GSPS ADC and quad-channel, 16-bit, 2.8 GSPS DAC, with the Virtex-7 and optical interconnects, helps system designers create complete and powerful radar, communications and software radio sub-systems." On the output side, the Texas Instruments DAC39J84 D/A converter accepts baseband real or complex data streams from the FPGA. Each stream then passes through digital interpolation and upconversion stages before delivery to the D/A at sampling rates up to 2.8 GSPS, a new high for Pentek products. Users can select from three selectable conversion profiles to match the requirements of a wide range of applications. Profiles include A/D and D/A sample rates, bits of resolution, as well as digital downconverter and digital upconverter modes. Both models offer native x8 PCIe Gen .3 system interfaces, delivering peak rates of up to 8 GB/sec. FlexorSet carriers offer a choice of Virtex-7 FPGAs to match the specific requirements of the processing task. Optional LVDS connections to the FPGA provide custom I/O for flexible platform configuration. Optional optical interfaces for FPGA gigabit serial links offer fast connections between boards and systems. The 3U VPX Model 5973-320 supports these optical links through VITA 66.4 backplane connectors. "The FlexorSet integrated solution reinforces the value of combining FMC and carrier as a matched set to simplify development tasks for our customers," said Robert Sgandurra, director of Product Management, Pentek. Bundling for Seamless Integration Both FlexorSets come pre-configured with a suite of built-in functions for data acquisition, time tagging and waveform generation, all tailored and optimized for the FMC and carrier. This IP enables high performance capture and delivery of data to provide an ideal turn-key signal interface for radar, communications and general data acquisition applications, eliminating the FMC/carrier integration effort typically left to the user. Development Tools and Software Support FlexorSet presents system integrators with an ideal development and deployment platform for custom IP. The Pentek GateFlow® FPGA design kit gives users access to the complete factory installed IP at the source level, allowing them to extend or even replace the built-in functions. GateFlow is engineered for the new Vivado Design Suite from Xilinx. Pentek's GateXpress® PCIe configuration manager supports dynamic FPGA reconfiguration though software commands as part of the runtime application. This provides an efficient way to quickly reload the FPGA, which slashes development time during testing. For deployed environments, GateXpress enables reloading the FPGA without the need to reset the host system, ideal for applications that require dynamic access to multiple processing IP algorithms. Pentek's ReadyFlow® Board Support Package is available with drivers for Windows and Linux operating systems. The ReadyFlow C-callable library contains a complete suite of initialization, control and status functions, as well as a rich set of precompiled, ready-to-run- By plugging the FlexorSets into a Pentek 8266 SPARK PC development system or a 8267 SPARK VPX development system, application work can begin immediately. The SPARK system saves engineers the time and expense associated with building and testing a development system and ensures optimum performance of Pentek boards. All SPARK development systems come with software and hardware installed and ready for immediate operation. Form Factors, Pricing and Availability For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com. Delivery is 8-10 weeks ARO. About Pentek Pentek, Inc., an ISO 9001:2008 certified company, designs, manufactures and markets innovative COTS and rugged DSP boards and system recorders for commercial, government and military systems, including radar, communications, medical and industrial control applications. Pentek offers powerful VME, VPX, VXS, PMC, XMC, FMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Xilinx FPGAs. For more information about Pentek, Inc. please visit www.pentek.com. ### For access to the release and data sheets, please visit: http://www.pentek.com/ Pentek, FlexorSets, ReadyFlow, GateXpress , GateFlow, SPARK are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders. North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Tel 201-818-5900; International Sales Contacts: For a list of Pentek representatives and distributors, please visit http://www.pentek.com/ Media Contact: Barbara Stewart Patterson & Associates 480-488-6909 barbara@patterson.com End
Account Email Address Account Phone Number Disclaimer Report Abuse
|