Metal tubes: Handling and Processing by Systems of Weerth Handling-Systeme GmbH

By: Weerth-Handling-Systeme GmbH
 
RAVENSBURG, Germany - Feb. 11, 2014 - PRLog -- Seekirch 4.2.2014

Update: Many industries need metal tubes cut to exact lengths (millimetres) for their products - out of many metals and alloys. Especially adapted and extremely economical working systems are supplied by Weerth Handling Systeme (WHS), Germany/Baden-Württemberg. The system advantages are considerable.

WHS is one of the first manufacturers worldwide, producing innovative machinery and plant for the chipless and low-burr-cutting of metal tubes, including the self-developed, patented “tear/break-system”. WHS is a German company, producing machinery the cutting knife of which can cut up to 80.000 times (depending on the pre-product), which - together with the minimum material loss during cutting - leads to significant cost savings resp. profit increases.

Whilst the material loss in common cutting systems - depending width of the saw blade - can reach up to 2 mm per cut, the WHS-machines cut without material loss. When cutting  several hundred meters of tubes this can sum-up to considerable material (value) loss.

The low-burr processing, due to the integrated ‘tearing’ of the tube, allows for direct further treatment and additional production steps are omitted, like removal of burrs, washing of tubes, and more, depending on the further use of the pieces.

The process is as follows:  The circular knife runs around the tube and cuts it. However, before the tube is cut completely, the knife is retracted and the tube ‘torn’ (for bigger diameters ‘broken’). By this - formerly patented - process the tube is cut without inner burrs, which would result if the tube was cut completely.

An additional widening  of the inner diameter for further processing is thereby omitted and a mandrel could easily be inserted for further production steps.

An additional linking to other production steps (as reshaping, chamfering, etc.) is easily possibly and will either be supplied in addition or the cutting system can be integrated into existing plants.

The clients consist of processors of precision tubes out of non-ferrous metals, all possible steel- and stainless steel materials, up to Titanium - including solar heating plants, heating- and air conditioning manufacturers, automotive and aircraft industries. Own developments, formerly patented, to store and feed tube- and pipe sections round out the production program. More details are available from the web.

Press contact:

Weerth-Handling-Systeme GmbH

Hans Ernst Weerth

Bachstrasse 10

88276 Berg-Weiler/Germany

+49-751-362993-0

+49-751-362993-22

http://www.weerth.com

info@weerth.com

Author:

Michael Richter – International Marketing- and Sales Consultancy
Hauptstrasse 27
88422 Seekirch/Deutschland
http://www.marketing-und-vertrieb-international.com/ =Marketing
http://www.internationales-marketingkonzept.de = Ländererfahrungen
michael.richter@marketing-und-vertrieb-international.de
Tel. +49-7582-933371

Contact
Weerth-Handling-Systeme GmbH
***@weerth.com
+49-751-362993-0
End
Source:Weerth-Handling-Systeme GmbH
Email:***@weerth.com
Tags:Tube Cutting, Tube Chamfering, Titan Tube, Aluminium Tube
Industry:Automotive, Industrial
Location:Ravensburg - Baden-Württemberg - Germany
Subject:Products
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Michael Richter-International marketing and sales News
Trending
Most Viewed
Daily News



Like PRLog?
9K2K1K
Click to Share