AVI’s Rugged NTSC/PAL to SDI Converter Solves the Interface Issues in Surveillance Mission Systems

 
 
Single Channel NTSC/PAL to SDI Converter
Single Channel NTSC/PAL to SDI Converter
CHARLOTTESVILLE, Va. - Aug. 12, 2013 - PRLog -- Applied Video Imaging (http://appliedvi.com/), a provider of rugged video products for airborne, ground, and marine surveillance missions, introduced its NTSC/PAL to SDI Converter (http://appliedvi.com/products/video-converters/) unit. The rugged stand-alone unit can convert up to four separate analog video inputs to four dual SD SDI or HD SDI video outputs.  This allows legacy video sensor to be incorporated into new or upgraded mission systems saving cost and time.

Each of the four analog video inputs is independent and can accept component SD/HD, NTSC/PAL composite or NTSC/PAL S-Video signals (Single Channel Unit Shown).   Low latency, high performance processing provides SDI encoding to dual multiplexed SDI outputs.  Component video up to 1920x1080 resolution is supported.  SD or HD SDI outputs are automatically matched to the resolution of the inputs which are auto detected.  Re-clocked outputs provide robust, maximum distance transmission of SDI video.

AVI’s rugged NTSC/PAL to SDI Video Converter offers a high performance solution for converting component SD/HD, NTSC, PAL, or S-Video signals to SDI.   Available in 1, 2, or 4 channel variants, all sensors and mission video sources can be used, maximizing the capability of the mission system.

“AVI’s new NTSC/PAL to SDI Converter allows our customers to interface to existing sensors and processors with NTSC or PAL video outputs.  Customers are not always able to replace the entire sensor suite during mission system upgrades,” said Bruce Carriker, President and founder of AVI.  “This provides a systematic and a cost effective road map for upgrading their sensor platforms.”

Designed to DO-160 standards, AVI’s rugged NTSC/PAL to SDI Converter single channel unit weighs 1.4 pounds in a 5.5 x 4.3 x 1.5 inch package and accepts 9 – 36 volts DC power. 

AVI’s NTSC/PAL to SDI Converter is designed for use in airborne, ground, and marine law enforcement and defense surveillance applications. Based on industry standards, it can be used with any SDI display or system.

About Applied Video Imaging, LLC - Applied Video Imaging designs and manufactures advanced rugged video processing, distribution, recording, and display products for the airborne, ground, and marine surveillance markets.  AVI’s products, services, and solutions optimize surveillance sensor suites, enhancing the platform and operator’s mission effectiveness.  For more information, visit www.appliedvi.com or call 434-974-6310, toll free 855-974-6310.

 
End
Email:***@appliedvi.com Email Verified
Phone:434 974-6310
Tags:NTSC/PAL SDI Converter, Rugged Video Converter, SDI Converter, Mission Systems, Surveillance
Industry:Defense, Aerospace
Location:Charlottesville - Virginia - United States
Subject:Products
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Page Updated Last on: Aug 12, 2013



Like PRLog?
9K2K1K
Click to Share