Do It Yourself Ceiling FanThere was a time, it was almost impossible to install a ceiling fan on your own. One person was required to keep the fan, while another with the wiring from the ceiling.
By: Louise Davis Limits, which are pre-wired to fit with a metal support (the so-called junction box) at the future site. If support is in the ceiling made of plastic, it was only designed to provide a light and must be replaced will be assessed with a metal box to the importance of a ceiling fan. Metal junction boxes to 35 pounds (15 87 kg) . If the fan weighs more, its support must be a clip on ceiling beams or beams. In the middle of the junction box is a hole where the building's internal wires exit. Before wiring in the ceiling, be sure to turn off the power switch that sends power to the ceiling fan. Working with live wires can cause electric shock and serious injury. It should have four wires, if the ceiling was wired for a front ceiling fan. The green wire for ground, black for the power to the fan, red or blue for power, light, and a common white wire. If the wires are unattached to a device, the ends are sealed with electrical tape to prevent or capped with plastic terminators that contact with one another. Assuming that the ceiling fan is new, it must be mounted. Open the box, unpack, and set the parts in an organized fashion to facilitate the work. Before you install a ceiling fan, please read the instructions on the how to install the ceiling fan, familiarize with the parts such as the ceiling fan blade. This will help avoid that incorrect installation may require, backtracking and extra time. The first step in installing a ceiling fan in the rule requires attaching a support bracket is (that with the fan) to the existing ceiling bracket. The support bracket makes it possible to hang the fan while connections are made. Some brackets support an open-Set the downrod and vehicle assembly. Others use a heavy wire coat hanger, which extends from the top of the downrod and attaches a metal bracket in the ceiling plate. With the power off and the partially-assembled ceiling fans hang from the support bracket, cabling can now be connected. Ideally, the wires from the ceiling are color coded to the ceiling fan wires. If the ceiling wires are colored differently, you ask an electrician if you are unsure how to bring it properly. Once the wires are connected to the fan in the upper cap lifted and hoisted and bolted into the rim of the ceiling sustainable footing. From here, ceiling fan blades or paddles are attached with screws. A Light Kit is often, but sometimes also sold separately. If you do not require a light, the fan's wire housing is limited in a decorative pan. If you prefer a light kit, if you have a ceiling fan, they are often pre-assembled and only require connection of a wire harness and housing. Many use candelabra-style lamps with small bases, so please make sure the correct type and performance. A glass bowl fits in, is complete with a decorative button, that screws on the light-strip formed. If the job again on the power and be sure that the pull-chains are in the "on" position to the fan and light. You will only need a ladder and some basic tools to install a ceiling fan, and it should take about an hour and a half. Fans also come with a balancing kit if necessary. This will keep the fan from swaying at high speeds. If your ceiling is not pre-wired for a ceiling fan, an electrician, the necessary wiring and installation of a metal junction box on the site. This could cost more than the fan itself, but Sie'll benefit from the ceiling fan in the coming years . You might also reflect the investment at lower heating and air conditioning costs in the course of time. For more information on Do It Yourself Ceiling Fan visit http://www.keepdubuquewarm.org # # # Keep Dubuque Warm provides tips and information on Home Improvement, Home Design, Home Improvement and gardens End
|
|
