Fast Beam Steering Mirror Piezo Controller for less

Sept. 1, 2009 - PRLog -- The closed-loop units contain two servo controllers, sensor circuit channels and 3 power amplifiers.

Features and Advantages of the E-616 Multi-Axis Controller
   Three Integrated Amplifiers Provide up to 10 W Peak Power
   Closed-Loop and Open-Loop Versions
   Bench-Top and OEM Modules
   Internal Coordinate Transformation Simplifies Control of Parallel Kinematics Designs (Tripod & Differential Drive)

Datasheet: http://www.physikinstrumente.com/en/news/fullnews.php?newsid=160
High Resolution Image: http://www.pi-usa.us/PRL/E616.jpg

Piezo Steering Mirrors: Why?
Piezo steering mirrors are faster than galvo mirror scanners and provide improved resolution and stability due to their high-stiffness, solid-state piezo drives. They are used to steer or stabilize beams or enhance image resolution. Applications range from optical commumication, astronomy and super-resolution microscopy to nano-lithography.

Tripod and Quadra-Pod Differential Drive Versions
The controllers can drive parallel-kinematics (highest performance mechanics, where all piezo actuators are connected to the same moving platform) steering mirror designs. With the tripod design (for S-325 Z/Tip/Tilt mirrors), the platform is driven by three piezo actuators at 120° spacing. The quadra-pod differential drive design (as used in the S-330, or S-334 mirror models) runs two orthogonal axes with a fixed pivot point based on two pairs of actuators operating in push / pull-mode. The differential evaluation of two sensors per axis improves linearity, stability and resolution.

Internal Coordinate Transformation Simplifies Control
Parallel-kinematics requires the transformation of the commanded tilt angles into the corresponding linear motion of the individual actuators. In the E-616, this is taken care of by an integrated circuit, eliminating the need of additional external hardware or software. Additionally, with the E-616.S0 tripod version, all actuators can be commanded by an offset-voltage simultaneously. As a result, a vertical movement, for example for optical path length tuning, is obtained.

Simple Setup and Operation
To facilitate integration, setup and operation the E-616 features both front and rear panel connections: The 25 pin sub-D piezo & sensor connector is located on the front, along with offset trim pots and LEDs for Power and Overflow. A 32-pin rear connector allows commanding and reading the sensor and amplifier monitor outputs.

# # #

PI is a leading manufacturer of piezo systems, piezo linear motors and precision motion-control equipment for photonics, bio-nanotechnology & semiconductor applications. PI has been developing and manufacturing standard & custom precision products with piezoceramic and electromagnetic drives for 35+ years. The company has been ISO 9001 certified since 1994 and provides innovative, high-quality solutions for OEM and research. PI is present worldwide with eight subsidiaries and total staff of 500+

ISO9001, leader in nanopositioning
piezo systems
ultra-precision motion control.
Piezo Stage
Piezo Ceramic Motor
6-Axis Hexapods
Photonics Alignment
Microscopy
Steering Mirror
Piezo Actuator
MicroMotion Robot / Controllers
http:www.pi.ws