Screw In Motion Sensing Light Switch

July 5, 2008 - PRLog -- http://assistivetechnologyservices.com/buy/All_Products/Helping_Hand_Products/Screw_In_Motion_Sensing_Light_Switch_78370.aspx

4 min. on duration
Use with 25W to 100W bulbs
12 ft range and 360° view
No wiring required

** Essential Info **

This is the easiest to install motion sensor switch. Simply unscrew existing light bulb, screw the sensor in position, and screw the light bulb into it. Automatically turns the light bulb on when motion is sensed and turns it off 4 minutes after motion stops. Perfect for closets, basements, garages, etc. (for indoor use only). Measures 3" in diameter and 4" long. The motion sensor switch can be used with 25W to 100W bulbs (not included).

More Info

NOTE: This unit is not designed for use with an enclosed or shaded bulb of any kind. Use only with ceiling-mounted, bare bulb light socket.

The motion sensor switch automatically turns lights on when you enter a room and off after you leave. No wiring is required; just screw the device into a standard, uncovered light socket. Turns lights off within minutes of leaving the room. Senses motion within 360°. Ideal for laundry rooms, garages, basements, attics, walk-in closets and stairways.

Specifications

Range: 12 ft range and 360° view
Dimensions: 3" x 4" (7.62 x 10.16 cm)
Compatibility: Use with 25W to 100W bulbs (not included)

http://assistivetechnologyservices.com/buy/All_Products/H...