How Do You Make A Brick Pillar

By: Global Associates
 
KOLKATA, India - July 20, 2021 - PRLog -- Introduction

The use of brick columns instead of concrete columns enhances the architectural elegance. The cross-section of the built brick columns might be round, rectangle, square, or elliptical. These can be built to the required height. Corner pillars, porch columns, boundary gate pillars, and free-standing columns are all possible uses for these columns.

When compared to concrete column construction, brick column construction is quick and uncomplicated, requiring fewer tools and labor.

When compared to R.C.C. columns, the brick column is a more cost-effective option. The success of building a long-lasting brick column comes down to three things: proper planning, the right tools, and knowledge on how to build a brick column.

How to Build Your Own Brick Column

Set The Height And Width Of The Brick Column


The first step is to figure out how tall and wide you want your brick column to be. These measures aid in calculating the number of bricks and mortar required to construct the columns.

Layout Preparation on the Ground

Initially, a temporary rod marker must be used to pinpoint the location and center of the pillar or column on the ground. This marking will assist in supporting the vertical and horizontal alignment of the nearby pillars.

Foundation and Excavation

Excavation
is carried out in order to construct the ground support. The depth of the excavation is determined by the foundation's thickness and the type of masonry used. If the masonry does not require reinforcement, a basic concrete bed of an appropriate mix is poured into the excavated area.

Masonry Column Brickwork

The brickwork is started when the foundation layer has been cured. The first-class bricks are utilized in conjunction with a 1:4 cement mortar. This is enough to securely transfer the loads to the foundation. The bricks must only be laid after they have been wetted by dipping them in water. For severe moisture conditions, certain brick column layers require a damp-proof coating. With the help of a plumb bob and compass, the brick is set vertically upwards while ensuring verticality and horizontal alignment.

Curing Procedures

Depending on the construction, the brickworks must be properly cured for 7 to 10 days.

Plastering, Finishing, and Painting are the Next Steps.

The majority of the brick column construction (https://www.constructionnews.co.in/guide-to-how-to-build-...) would look nice without plastering. It can, however, be plastered and completed if necessary. They can be painted if necessary.

Contact
Rajib Dey
***@gmail.com
End
Email:***@gmail.com
Tags:Brick Wall Construction
Industry:Construction
Location:Kolkata - West Bengal - India
Subject:Websites
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse



Like PRLog?
9K2K1K
Click to Share