Separate Tangled Springs and Orient Into Your Assembly Line

 
 
speedfeeder
speedfeeder
 
Spread the Word
Listed Under

Tag:
Spring Speedfeeder

Industry:
Manufacturing

Location:
BRISTOL - Connecticut - US

Subject:
Products

BRISTOL, Conn. - June 27, 2019 - PRLog -- If you are currently buying or producing springs in bulk and struggling with detangling, separating and delivering them to an operator or assembly station, the Colombi SpeedFeeder may be just the product you need.  The SpeedFeeder is an effective and efficient solution for detangling and delivery of a wide variety of compression springs. Click on this link to see a demo:

The Speedfeeder delivers springs through tubing to the point of use.  Springs can be delivered one at a time by utilizing the standard escapement, which is signaled to release one spring at a time on demand.  Springs can be delivered directly to the final point of assembly in the product, or to the spring dispensing unit which will present the singulated spring on a pin for ease of pick-up by an operator. The addition of  an optional PLC controller makes it possible to integrate a number of intelligent escapements, queue sensors and alarm indicators.

Detangling of the springs is accomplished through the use of compressed air, which creates a vortex within the sealed drum.  Aligned and singulated springs are blown out of the drum through up to 6 individual ports.

The actual drum capacity and separation rate are dependant upon the specific spring characteristics, and delivery rates of up to 100 springs per minute are possible.  In most cases we can perform testing on a  demo unit to determine the actual feed / delivery rate  and time between required refilling of the bulk supply  of your specific springs for optimum performance.

Your springs are bigger than the specs outlined for the SpeedFeeder?  Not to worry!  Colombi offers the Bigmatic and Maximatic Separation and Delivery Systems as well.  Springs up to 1-3/4" in diameter, 3"  overall length and weights of up to 15 grams can also be separated and delivered.  Custom systems can  be developed to handle other shapes and sizes of springs and wire forms as well.

So give us a call at (860) 583-0517 or check us out at https://www.novoprecision.com/products/spring-feeding-dev... .  We also offer free spring evaluations, just send us some of your troubled springs and we will run it through one of our custom detanglers or speedfeeders.

Media Contact
Sherwood Griffing
***@novoprecision.com
8605830517
End
Email:***@novoprecision.com Email Verified
Tags:Spring Speedfeeder
Industry:Manufacturing
Location:BRISTOL - Connecticut - United States
Subject:Products
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Novo Precision LLC PRs
Trending News
Most Viewed
Top Daily News



Like PRLog?
9K2K1K
Click to Share