New Low-Height, Low-Frequency Vibration Isolation Platform Adapts to Space Constraints in Critical Micro- and Nano-Microscopy
At just 2-1/4 inches in height, while isolating vibrations as low as 1 hertz, the new completely-passive Negative-Stiffness tabletop vibration isolation platform – developed by Minus K Technology – provides the industry's thinnest low-height, low-frequency isolator for optimizing space in critical microscopy and laboratory applications.
Image 1: The new Negative-Stiffness CT-1 ultra-thin, low-height, low-frequency vibration isolation platform mitigates space constraints in microscopy applications.
"Vibration isolation options for microscopy instrumentation like scanning probe microscopes, interferometers and stylus profilers have been limited to systems of several inches or more in height, which for many labs can be too tall," said Erik Runge, Director of Engineering at Minus K. "This can make for tight working conditions, which limits employing adequate vibration isolation, and compromising the functionality of the instrumentation. The new CT-1 ultra-thin, low-height isolator solves this problem."
Negative-Stiffness isolators employ a unique and completely mechanical concept in low-frequency vibration isolation. They do not require electricity or compressed air. There are no motors, pumps or chambers, and no maintenance because there is nothing to wear out. They operate purely in a passive mechanical mode. The Negative-Stiffness CT-1 isolator achieves a high level of isolation in multiple directions. It has the flexibility of custom tailoring resonant frequencies vertically.
The transmissibility of the CT-1 is substantially improved over air and active isolation systems. When adjusted to 1/2 Hz vertical natural frequency, the CT-1 Negative-Stiffness isolator achieves approximately 93 percent isolation efficiency at 2 Hz; 99 percent at 5 Hz; and 99.7 percent at 10 Hz.
"With the increased sensitivity in instrumentation, particularly at the nanometer level, more precise vibration isolation technology was needed to deal with lower-hertz vibrations,"
Negative-Stiffness vibration isolation systems have become a growing choice for micro- and nanotechnology microscopy applications. Not only are they a highly workable vibration solution, but they provide location flexibility and portability that other vibration isolation systems cannot.
About Minus K Technology, Inc.
Minus K® Technology, Inc. was founded in 1993 to develop, manufacture and market state-of-the-
For more information on negative-stiffness isolators please contact Steve Varma,
Minus K Technology, Inc.; 460 Hindry Ave., Unit C, Inglewood, CA 90301;
Page Updated Last on: Mar 13, 2019