How to Solve the Problem with MS908P

KABUL, Afghanistan - March 23, 2017 - PRLog -- I share a problem about Autel Maxisys Pro key erasure on 2000 ford focus and its solution with you.
Issue description:

I intended to replace the PCM in my vehicle. With followed all the instruction for key erasure, the Autel MaxiSys Pro ms908p Scan Tool seemed to freeze at the 9 second make on the task bar.

Reasons:
The engine told me that I could only program new third key with having 2 already programmed keys, which meant that I couldn't program new key if I did not have 2 working keys.

Solution:
1 Download the beta version V6.12.10 to have a test.

2 Try to program key manually. The process bar will appear for 10s after key erasure. Please ignition off and program it as followed:

Turn the ignition key to position 0

Cycle key1 in the ignition from OFF to RUN for at least 3 seconds

Cycle key2 in the ignition from OFF to RUN for at least 3 seconds.
Cycle key1 in the ignition from OFF to RUN for at least 3 seconds.
Two keys are programmed now.

I have good experience for buying Autel MaxiSys Pro ms908p Scan Tool (http://www.obd2tool.com/goods-4525-Autel+MaxiSys+Pro+Scan...) on obd2tool.com website, they can offer you two years free udpate online and offer you the best service: sales@obd2tool.com