Handbook of Material Weathering, 5th Edition - Just Published

Announcing publication of important new edition used by scientists worldwide
TORONTO - May 27, 2013 - PRLog -- This 5th edition of Handbook of Material Weathering contains systematic updates of knowledge generated in more than last 25 years when the 1st edition was prepared. (http://www.chemtec.org/proddetail.php?prod=978-1-895198-62-1)

The information required for professional use has been growing so rapidly that additional books had to be written to accommodate essential knowledge for implementation in technological processes used to manufacture products, which deteriorate on exposure to weathering stress factors.
This edition contains 20 chapters, which can be divided into the following groups:
• Theory (photophysics and photochemistry)
• Stress factors (parameters of exposure, measurements in assessment of weathering conditions, and climatic conditions)
• Methods of weathering (laboratory degradation studies, weathering cycles, sample preparation, weathering data interpretation, lifetime prediction, and artificial weathering versus natural exposure)
• Methods of testing of weathered samples (effect of weathering on material properties and testing methods of weathered specimens)
• Weathering of polymers (data on 52 most important polymers, including mechanisms of degradation, effect of thermal history, characteristic changes in properties with graphical illustrations, and tables with numerical data)
• Weathering of products (data on 42 groups of industrial products, including their required durability, lifetime expectation, relevant degradation mechanisms, and characteristic changes with graphical illustrations)
• Effect of additives on weathering (12 groups of additives are discussed)
• Effect of environmental stress cracking (parameters controlling ESC, mechanisms, methods of testing, and effect on materials)
• Specific topics (suitability of weathered materials for recycling, interrelation between corrosion and weathering, and methods of study and prevention of deterioration of historical monuments made out of stone)
The above information is based on the thorough review of published papers, patents, and other relevant sources updated to the most recent data and information.
In addition to this book, 3 additional volumes contain supplementary information:
Handbook of Material Biodegradation, Biodeterioration, and Biostabilization by Falkiewicz-Dulik, M, Janda, K, and Wypych, G., 2010 (http://www.chemtec.org/proddetail.php?prod=978-1-895198-44-7)

Handbook of UV Degradation and Stabilization by Wypych, G, 2011 (http://www.chemtec.org/proddetail.php?prod=978-1-895198-46-1)

Atlas of Material Damage, Wypych, G, 2012 (http://www.chemtec.org/proddetail.php?prod=978-1-895198-48-5)

The first two books contain information relevant for protection of materials against biological and environmental stress factors. The Atlas of Material Damage has focus on structure and morphology of commercial materials and methods of damage prevention by tailoring morphology.

This set of monographic sources was prepared for research chemists in the photochemistry field, chemists and material scientists designing new materials, users of manufactured products, those who control the quality of manufactured products, and students who want to apply their knowledge to real materials. The books are invaluable for regulating agencies and patent and litigating attorneys.
Handbook of Material Weathering is now used in about 100 countries, although frequently old editions (as seen from citations) are still in use, which do not contain up-to-date information.

The first edition of this book was published by ChemTec Publishing in 1990. The book had 18 chapters and 518 pages filled with the most up-to-date information on the subject of material weathering available in 1990.
Considering the size of the book and typesetting, the present edition is at least 3 times larger, in spite of the fact that two chapters were omitted from the fourth edition: Chapter 17. Stabilization and Stabilizers and Chapter 18. Biodegradation. Even without these two chapters the present 5th edition is larger than the previous edition. The reason is quite obvious − the field is systematically growing with new data, methods, and discoveries happening every day.
The reasons for eliminating the two chapters are as follows:
• If these two chapters would still be included in the book, the book would need to have two volumes which makes a book more difficult to use (separate table of contents and indices).
• In anticipation of the need for specialized monographic sources, the two chapters mentioned above were not updated in the previous edition, so information was already lacking novelty.
• Short chapters can only present brief review of the subject, whereas in applications detailed information is needed
• Two handbooks were published by ChemTec Publishing on the subjects of the omitted chapters:

Handbook of Material Biodegradation, Biodeterioration, and Biostabilization by
Falkiewicz-Dulik, M, Janda, K, and Wypych, G., 2010 (http://www.chemtec.org/proddetail.php?prod=978-1-895198-44-7)

Handbook of UV Degradation and Stabilization by Wypych, G, 2011 (http://www.chemtec.org/proddetail.php?prod=978-1-895198-46-1)

These two books give much broader and comprehensive information, such as it is required today, especially considering rapid changes which occurred recently because of health and safety concerns (biostabilization) and new discoveries (UV stabilization).
In addition, to present volume and the above two books, there is also a new book:

Atlas of Material Damage, Wypych, G, 2012 (http://www.chemtec.org/proddetail.php?prod=978-1-895198-48-5)

This book was written to emphasize importance of the material structure in photodegradation and photostabilization and also to account for the morphological changes which occur when materials degrade. This addition makes narrative of material degradation more comprehensive, showing new ways to deal with unstable materials.
I hope that the information provided in these four books will help readers to advance their studies on particular subjects of their research and that the results of these studies will be implemented in the future editions of these books, since we try to report current developments to foster future discoveries.

George Wypych
Toronto, 2013
Posted By:***@chemtec.org Email Verified
Phone:+1 (416) 265-2603
Tags:Polymer, Rubber, Weathering, Stabilization, Degradation
Industry:Engineering, Environment
Location:Toronto - Ontario - Canada
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse

Like PRLog?
Click to Share