Follow on Google News News By Tag Industry News News By Place Country(s) Industry News
Follow on Google News | Understand the laptop battery Part 3Battery, try to turn off the wireless, Bluetooth and infrared port. Removed without the use of peripherals at the same time and avoid enable large 3D programs, games, etc., in order to reduce unnecessary battery consumption.
5, new battery, you need to pay attention to those matters? New battery is required in the normal use ahead carry charge and discharge cycles. Battery from the factory to the hands of users there is a time difference, time difference and long battery electrode materials passivation, three times for newly purchased battery fully charge and discharge cycles to eliminate passivation of electrode materials, activate battery performance, to reach maximum capacity. The same time the pen between the computer's battery and computer data transfer protocol port, you need to go through 2-3 times charge and discharge cycles, the battery percentage percentage of the actual capacity of the computer display before being synchronized. Cycle steps: the battery installed in the computer to charge and discharge until the shutdown, and then charging, charging time must be more than 12 hours, will put the charge and the action is repeated three times. 6, the use of an external power supply need to unplug the Sony VGP-BPS2 battery (http://www.batteriescenter.com.au/ In fact, this depends on when you use an external power supply is not needed to charge the battery, number of battery charge is directly related to the life of lithium battery charge and discharge times under normal circumstances is fixed, the charge number only about 500 times? Each battery on one charge, corresponding, also reduces time charge cycles. But now many notebook manufacturers are taking into account the vulnerability of the battery, the battery protection technology does not meet certain conditions will not charge. Even so, when you use an external power supply for a long time to use the computer, it is recommended that you unplug the battery, because the high temperature is also one of the battery's nemesis, notebook PCs in use will have a certain temperature, which is very harmful to the battery. 7, the battery is best to use no electricity and then charging it? For users of the lithium-ion battery, its biggest advantage is by secret effect, so do not have to use the electricity and then charging for NiMH or NiCd batteries, best to no electricity to recharge, especially The nickel-cadmium battery memory effect is obvious. So I suggested that users should regularly use the battery to no electricity in the charging of the battery performance help, especially users of laptop batteries. 8, of the reasons for the rechargeable battery life will be shorter as the frequency of recharging? All rechargeable batteries are made by the chemical materials by the chemical energy into electrical energy, said reaction is a reversible reaction, and can be charged and discharged, but these chemical material is not always maintain its chemical nature, as the battery charge and discharge, the reaction between the chemical substance will gradually aging and deterioration, the result is to make the usable capacity successive decreased, usage time, successive shortening, when reaches a certain degree of charge and discharge, the chemical substance of the Sony VGP-BPS8 battery (http://www.batteriescenter.com.au/ 9, the fully charged battery will soon no electricity it? This usually happens when there are the following two: A. The battery life is about to end. (In this case, only the weight change battery) battery itself is a consumable, the charging and discharging of the lithium-ion battery life is generally about 500 times. Battery charge and discharge more than getting worse and worse, this time in relation to change a battery. B. Improper operation of a battery pack and battery in the high temperature environment. b, remove the battery, the battery pack on the metal terminals short-circuited. c AC to DC Adapter poor quality and can not provide a stable voltage) makes power management Junction Road information confusion, unable to properly charge and discharge. End
|
|