Follow on Google News News By Tag * Energy * Oil * Workover Rig * Hopper * Shale Shaker * Solids Control System * Indonesia * Malaysia * Degasser * Producer * Cost * More Tags... Industry News News By Location Country(s) Industry News
Follow on Google News | XJ350 Workover rig solids control systemWorkover ig is another oil rig for oil and gas drilling. We usually divide them by the rig horse power. So, during the work over project, the solids control system will have same function as common solids control system for oil drilling rig
By: OGEM Equipment Commonly, the drilling contractor or drilling services company will have work over rigs also to provide related service XJ350 workover rig is a popular type among oil and gas drilling indsutry. Following content is main configuration and design for Indonesian oil service company http://www.tsogem.com/ I. Mud tanks design XJ350 can work over oil well upto 3600m. Generally, we will use it drill to 3000m. According to this feature, the solids control sytem will be similar with ZJ30 rig mud system. There will be 3 tanks. Each mud tank sized 11x2.3x2.2m. Even capacity is about 250bbl. all tanks including compartments. Tank one will be separated into trip tank, sahker compartment, degasser compartment. Tank 2 including desander room, desilter room, storage tank and one chemical barrel if requested by user. Tank 3 is combined with mixing compartment and suction pit. II. Solids control equipment detail We'll introduce this section according to solids control process Firstly lets see shale shaker. We set 2 linear motion shale shaker treating 600GPM drilling fluid. The G force will be 7.0G and adopts top vibrator-Ital Vibras. Shaker screen is made of S.S304 and mesh size, conductance conforms to API RP13C. The clamping system is quick installation and uninstallation the polyurethane wedges http://www.tsogem.com/ Then we come to the vacuum degasser. Actually, for this XJ350 work over rig the ZCQ240 will be ok. This model degasser holding capacity 1056GPM. The vacuum pressure is about -0.03~0.045Mpa. Its efficiency is over 95%. Main motor is 15KW, while vacuum pump motor is 2.2kw. It's compact and light. Only about 1100kg Thirdly, the hydrocyclone separator. The Desander and Desilter. Accordingly, they should have capacity about 1056GPM. If we adopts mud cleaner then, there won't be separated desander or desilter. In fact, separated hydrocyclone separators are more economical than mud cleaner. The desander having two 12" cones, while CNQ Desilter will have dozen 4" hydrocyclones. These separators are designed with bottom shaker. Furthermore, the desilter can be designed with s.s ball valve to control treating capacity flexibly Another mud process equipment is the jet mixing unit. Or we call it mud mixing pump/venturi hopper pump. This pump will be mounted on 3# tank. As per former design, the pump will complete with 7.5kw motor. The flow rate is about 158GPM. http://www.tsogem.com/ Others are the mud agitators, jet mud gun, etc. assistant mud equipments. Moreover we have to configure the whole electic system, control cabinet, pipelines. Valves, clean gates, ladder, walkway, guardrail, etc. Above XJ350 workover rig solids control system is designed for an Indonesian clients. This proposal is rather optimal and economical on price. Meanwhile, client is happy with our design. Wish this can do his clients favor and save their drilling cost and get more benefits # # # OGEM Equipment provide drilling mud process equipment for oil and gas drilling, HDD, CSM drilling, tunnelling, shielding,mining, etc. industry. Including drilling mud solids control, drilling fluid recovery, drilling mud circulation, slurry separation End
Account Phone Number Disclaimer Report Abuse |