Model 7435 16-Channel A/B Switch Offers Three Control Methods

April 29, 2011 - PRLog -- Electro Standards Laboratories, Cranston, RI, has just announced the Model 7435 Auto-Controlled 16-Channel RJ45 A/B Switch. This switch system in a compact Rackmount configuration allows sharing a single port RJ45 interface device connected to the COMMON port among two other devices connected to the A and B ports for each of the 16 channels. The user may configure the port position, A or B, of the individual channels manually, via the GUI or automatically via programming.

In the Automatic Mode, the Model 7435 controls the position of individual channels by sensing incoming data on ports A and B every millisecond. If no data is received on port A for a user-specified number of seconds, the unit will then check the current status of port B. If valid data is being received on port B, the appropriate channels will switch to B. If port B is also inactive, then those channels will remain in position A.

A Graphical User Interface panel allows manual control of the position of each channel individually. Pushbuttons allow gang switching all channels for a single unit or all channels for all units (global) that comprise the switching system.

This highly-reliable switch passes switched signals via gold clad silver relays that maintain their position and continuity in the event of a power loss. The remote port is 10/100 RJ45 Ethernet port. User setup allows assignment of an IP address for the switch unit. This switch features password/login security features.

For detailed information on the Model 7435 visit http://www.electrostandards.com/ProductDetail/?productid=244. For more information on copper and fiber optic data switches developed by Electro Standards, call 401-943-1164; email: eslab@ElectroStandards.com; Web: www.ElectroStandards.com.

# # #

About Electro Standards Laboratories: Manufactures copper and fiber optic network switches and cable assemblies, interface converters, strain gage indicators, and digital signal conditioners. The Electro Networks division designs and installs voice/data networks. The R&D contract engineering services group specializes in the development of motor control and power systems.