Centennial Researchers Find Roadblock to Using Graphene in Electronics

Researchers at North Carolina State University have found one of the first roadblocks to utilizing graphene by proving that its conductivity decreases significantly when more than one layer is present.
By: Gene Pinder, Director of Marketing
 
April 18, 2011 - PRLog -- Did you know that pencil lead may just end up changing the world? Graphene is the material from which graphite, the core of your No. 2 pencil, is made. It is also the latest “wonder material,” and may be the electronics industry’s next great hope for the creation of extremely fast electronic devices. Researchers at NC State University's Centennial Campus have found one of the first roadblocks to utilizing graphene by proving that its conductivity decreases significantly when more than one layer is present.

Graphene’s structure is what makes it promising for electronics. Because of the way its carbon atoms are arranged, its electrons are very mobile. Mobile electrons mean that a material should have high conductivity. But NC State physicist Dr. Marco Buongiorno-Nardelli and NC State electrical and computer engineer Dr. Ki Wook Kim wanted to find a way to study the behavior of “real” graphene and see if this was actually the case.

“You can talk about the electronic structure of graphene, but you must consider that those electrons don’t exist alone in the material,” Buongiorno-Nardelli says. “There are impurities, and most importantly, there are vibrations present from the atoms in the material. The electrons encounter and interact with these vibrations, and that can affect the material’s conductivity.”

Buongiorno-Nardelli, Kim and graduate students Kostya Borysenko and Jeff Mullen developed a computer model that would predict the actual conductivity of graphene, both as a single layer and in a bilayer form, with two layers of graphene sitting on top of one another. It was important to study the bilayer model because actual electronic devices cannot work with only a single layer of the material present.

“You cannot make a semiconductor with just one graphite layer,” Buongiorno-Nardelli explains. “To make a device, the conductive material must have a means by which it can be turned off and on. And bilayer provides such ability.”

With the help of the high performance computers at Oak Ridge National Laboratories, the NC State team discovered both good and bad news about graphene. Their results appear as an Editor’s Suggestion in the April 15 edition of Physical Review B.

With a single layer of graphene, the mobility – and therefore conductivity – shown by the researchers’ simulations turned out to be much higher than they had originally thought. This good news was balanced, however, by the results from the bilayer state.

“We expected that the electrons’ conductivity in bilayer graphene could be somewhat worse, due to the ways in which the vibrations from the atoms in each individual layer interact with one another,” Mullen says. “Surprisingly, we found that the mobility of electrons in bilayer graphene is roughly an order of magnitude lower than in a single graphene sheet.”

“The reduction is substantial, but even this reduced number is higher than in many conventional semiconductors,” Borysenko adds.

Buongiorno-Nardelli says that the NC State researchers are turning their attention to remedying this problem.

“If we put the graphene on a substrate that can ‘siphon off’ some of the heat generated by the electric current, the crystal vibrations will decrease and the mobility will increase. Those are our next steps – running the simulations with graphene and substrates that have this property.”

The research was funded by the U.S. Department of Energy and the DARPA-CERA program. Buongiorno-Nardelli is a professor in the Department of Physics and joint faculty with Oak Ridge National Laboratory. Kim is a professor in the Department of Electrical and Computer Engineering. The physics department is part of NC State’s College of Physical and Mathematical Sciences. The Department of Electrical and Computer Engineering is part of NC State’s College of Engineering.

Written by Tracey Peake, NCSU News Services

About Centennial Campus and NC State University
Centennial Campus (http://www.centennial.ncsu.edu) is an internationally recognized 1,314-acre research park and technology campus owned and operated by North Carolina University. Home to more than 60 corporate, government and non-profit partners, such as Red Hat, ABB, and the USDA, collaborative research projects vary from nanofibers and secure open systems technology to serious gaming and biomedical engineering. Four university college programs also have a significant presence on campus – College of Engineering, College of Veterinary Medicine, College of Textiles and the College of Education. NC State is one of the top research universities in the country, with expenditures in research approaching more than $325 million annually. The university ranks third among all public universities (without medical schools) in industry-sponsored research expenditures. (http://www.ncsu.edu)
End
Source:Gene Pinder, Director of Marketing
Email:***@ncsu.edu Email Verified
Tags:Graphene, Electronics, Mobile Electrons, Electronic Devices, Nc State, Centennial Campus
Industry:Technology, Engineering
Location:United States
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Page Updated Last on: Apr 18, 2011
Centennial Campus at NC State News
Trending
Most Viewed
Daily News



Like PRLog?
9K2K1K
Click to Share