How to setup Maxspect Timer and Light Program

Maxspect Timer and Light Program setup Aquashoponline.com recently release new version of Maxspect G2, it has very strong functions on timer and light group programing, it is a very good choice for reef lover considering for their aquarium.
By: aquashoponline.com
 
 
April 17, 2010 - PRLog -- Maxspect Timer and Light Program setup


1) Time setting:


A. Hold down the "MODE" button for more than 2 seconds to enter time setting mode;
B. Begins flashing digital clock that is in the clock setting mode, press "+/ WHITE" or "-/BLUE" button set;



C. And then click the "MODE" key to switch to the minute setting mode, also based on a "+/ WHITE" or "-/BLUE" button to set;


D. Is set up according to "TIMER" button to return or more than 5 seconds does not operate automatically to return;


E. Setting a good time, the electronic clock work (electronic clock error of the value of a year is less than 2.5 minutes);


F. Set of time after full power to save data.





2) Program settings:


A. Press "TIMER" button for more than 2 seconds to enter automatically open and close the setting mode;



B. The first is a "WHITE" status indicator light, indicating that the white group at this time to set the boot or shut down time. The default state is displayed "on" the words that now set the boot time;


C. Click the "TIMER" button, the clock started flashing numbers that are in the clock setting mode, press "+/ WHITE" or "-/BLUE" button to set; and then click the "TIMER" key to switch to the minute setting mode , also based on "+/ WHITE" or "-/BLUE" button set;


D. Is set up according to "TIMER" key to display "OFF" the words that followed set the shutdown time; and then click the "TIMER" key to begin flashing digital clock that is in the clock setting mode, press "+/ WHITE" or "-/BLUE" button to set; and then click the "TIMER" key to switch to the minute setting mode, also based on a "+/ WHITE" or "-/BLUE" button to set;


E. Is set up according to "TIMER" button or more than 5 seconds without any key operation is to save the setting data out of setting mode;


F. In setting mode, or set to complete a set of start-up and shutdown data, press "MODE" button you can switch to another group of lights automatically open and close time settings;


G. Set a good boot time or shutdown time, after full power to save the data.

# # #

AquaShopOnline.com is an Internet Online Shop to provide massive range of goods on aquarium lights for world wide. Our Buyers are from the US, Europe, Australia and Asia- totaling to over 50 countries worldwide, and we are still growing.
End
www.aquashoponline.com News
Trending
Most Viewed
Daily News



Like PRLog?
9K2K1K
Click to Share