Brass Casting Information and Brass Foundry Information Just ReleasedBrass Casting Information, types of Brass Casting, and the process of a Brass Casting Foundry has just been released on a Metal Casting Website.
By: Kent Klein Brass Casting Information and stats on the Brass Casting Process and Brass Foundry can now be found at a new section on Metal Casting website that is all about Brass Casting. The new Brass Casting section can be accessed by users and non-users by visiting the following web address: http://www.metalcastingzone.com/ Here is an excerpt from the Brass Casting section page on Metal Casting Zone: “Brass casting, as the name suggests, involves the use of brass as the molten metal. Brass casting can be carried out by the way of sand casting only. Sand casting can be defined as a ‘cast part’ produced by formation of a mold from a mixture of sand and pouring the casting liquid (mostly molten metal) into mold. Then the air-cooling of the mold takes place. After the solidification of metal, the removal of mold takes place. The metal used here is brass. It is a known fact that brass is an alloy of copper and zinc. Hence, to be precise, the molten metal consists of two elements. Sand molding consists of two types- ‘Green sand’ molding and ‘air set’ molding. The first one consists of a blend of moisture, clay, silica sand and other additives. The second one makes use of dry sand bonded to all the above materials except moist clay, by the way of using an adhesive, which is fast curing. At times, there is a placing of a temporary plug (in the mold cavity) to enable the formation of a channel to pour the fluid which is to be molded.” The new Brass Casting webpage is there to provide users with all of the information they need on the Brass Casting Process and learning the basics of Brass Foundry. It can be visited for free at: http://www.metalcastingzone.com/ About Metal Casting Zone: Metal Casting Zone is a Community Site that brings users into a deeper relationship with Metal Casting. End
|
|
