6-Channels Switch Control RF Receiving Module for Smart Home Use

This DL-RX06C-LO6 RF module is a low cost, compact size, high sensitivity super heterodyne ISM band RF receiver module, with decoding (learning code) function. It adopts cost-effective wireless receiving chip and low power consumption MCU - DreamLNK
By: DREAMLNK
 
SHENZHEN, China - Aug. 14, 2020 - PRLog -- 6-Channel Switching Value RF Receive Module with Decoding (learning code) Function

DL-RX06C-LO6 is a low cost, compact size, high sensitivity super heterodyne ISM band wireless receive module, with decoding (learning code) function. It adopts cost-effective wireless data receiving chip and low power consumption MCU, with built-in image suppression function, can support 3V-5.5V wide voltage power supply, which performs high receiving sensitivity, as well as good anti-interference performance.

This RF Module can meet your needs (realize the application) by setting the logic state of N1 and N2, and independently leads out 2 ports as following: Pairing status LED indicator, SW learning code-checking button. The LED indicator and SW learning code-checking button can be led to the circuit board or casing of the product, which is convenient for the user to operate.

DL-RX06C-LO6 leads out the N1 and N2 setting ends from the module, and the pins adopt a 2.0mm pitch to reduce the size of the module. It also adopts T-type board double-sided in-line pad design. Its bottom plate uses a slotted in-line method, which the module can be inserted directly on the circuit board and then wave soldering. By this way, it can save the soldering of the pin header and reduce the height of the module to 10mm.

DL-RX06C-LO6 are compatible with PT2262 and 1527 encoding. The corresponding decoding and receiving module can also be ODM (customized) according to different remote-control encoding types.

Features
● Frequency range: 315MHz, 433.92MHz (special frequency can be customized)
● Sensitivity: Up to -112 dBm
● Power supply voltage input range: 3V-5.5V (recommended working voltage is 5.0V)
● Latch and non-latching mode selection: Set N1/ N2 decoding, output latch / unlatching
● It can be used to learn PT2260, 2262, 1527 remote controllers with good rate compatibility
● Encoded data transmission rate 2.5K bps (Manchester encoding)
● OOK modulation mode, can work with PT4450, 115H, 113, R25 (2SK3356) and other transmitting circuits
● Module size 29 × 12.8 × 6mm (T type plate)

Product Tags
ASK RF module, RF module supplier, Wireless data transmission, RF Receive module, Wireless Transceiver Module, ASK Module, Learning Code, Superheterodyne, Switch Control, RF Receiver Module

You can visit  www(dot)iot-rf(dot)com for more details!

Media Contact
SHENZHEN DREAMLNK TECHNOLOGY CO.,LTD
***@dreamlnk.com
James Wu
End
Email:***@dreamlnk.com Email Verified
Tags:RF Receiver Module
Industry:Consumer electronics
Location:Shenzhen - Guangdong - China
Subject:Products
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse



Like PRLog?
9K2K1K
Click to Share