Techsil launches a water clear 5 min epoxy for bonding composite substrates
By: Techsil Ltd
Techsil's Application Engineer Steve Green explains, "I have been working with a number of companies that were manufacturing and assembling products made of composite materials and a need arose to find a product that could bond carbon fibre parts quickly and neatly. There are expensive adhesives on the market but these were reported to be not that easy to work with. Techsil was able to develop a bespoke cost effective 1:1 epoxy formulation that is clear and cures in 5 minutes."
Green continues, "In tests, two carbon fibre parts were 'butt joined' and a bench weight test of 56lb was applied for 30 minutes and didn't trouble the joint at all. The part was then cleaned down and the joint line was found to be aesthetically acceptable".
Techsil® EP25880 Clear is a 2-component multi-purpose epoxy adhesive that is ideal for bonding various substrates including carbon fibre, wood, ceramics and metals. Techsil® EP25880 Clear cures to a completely water clear product with a Shore Hardness of 80 D, a Shear Strength on steel over 20 MPa and Tensile Strength on steel of over 30 MPa.
Techsil have just launched this product to the wider market and hope it will prove of interest to other manufacturers of products made of composite materials.
For more information contact: firstname.lastname@example.org
For a technical datasheet visit: https://www.techsil.co.uk/
Steve Green, Techsil, email@example.com