MBMA Partners With ORNL for Whole Building Energy Efficiency Study

Sept. 19, 2012 - PRLog -- Cleveland, Ohio, www.mbma.com:  The Metal Building Manufacturers Association (MBMA) has started the first phase of a long-term plan for major research in cooperation with the U.S. Department of Energy (DOE) and Oak Ridge National Laboratory (ORNL). The industry and DOE hope this joint work will ultimately provide designers with the knowledge to design higher quality and more energy efficient structures. Oak Ridge National Laboratory (ORNL) was awarded the MAXLAB project under the American Recovery and Reinvestment Act (ARRA) and this research is an element of that project.
ORNL’s light commercial building flexible research platforms will expose the test buildings to natural weather conditions for R&D purposes. The results are intended to advance energy efficiency solutions for new and retrofit applications. These test buildings will provide the opportunity to prove solutions in a low risk environment so they can be more readily accepted in the marketplace in actual commercial buildings.
The research will consist of two full-scale light commercial buildings. The first building to be completed will be a 2,400-square-foot, one-story metal building system with a gable roof. The second building will be a 3,200 square-foot, multi-story light framed building with a flat roof. MBMA will conduct research on the low-rise metal building.
Both buildings will have hundreds of very sophisticated sensors that will send data back to a central data center within the main MAXLAB research building to closely monitor heat flow through the various surfaces. The buildings will be constructed on insulated concrete foundations that include in-slab heating/cooling loops, which enable researchers to control the temperature of the fluid circulating in the loops. The slab system, which was specially designed for the experiments, will eliminate heat transfer between the ground and the test buildings. This separation of the buildings from the effects of the ground is necessary to accurately model the energy performance of the building shells and makes the research more useful for various geographic locations.
The structural frame for the metal building has been constructed on the site, and the roof and walls are currently under construction. Once construction is completed, ORNL researchers will begin setting up sensors and other scientific equipment to measure the energy performance of the building and to establish a performance baseline. The benchmark building will be insulated to a low level to establish a starting point. Future experiments will include higher insulation levels for the roof and walls and introduce other energy saving strategies that will be measured against the original benchmark performance.
Since metal buildings are used in approximately 40% of all low-rise non-residential construction, this is an important construction type to study in order to analyze, document, and show improvements in energy performance.
Energy research on buildings has previously focused on the component level, such as hot box testing, cool roof tests, air barrier tests, etc. However, whole building testing in a complete building system will allow for combined and individual impacts to be evaluated together due to the complicated interactions among the building components under controlled conditions.
Dan Walker, P.E., is MBMA’s Senior Staff Engineer and he is overseeing the research efforts with the MBMA Energy Committee. Dan indicates: “The ultimate intent of the research is to improve the energy efficiency of metal buildings by identifying and validating cost-effective new and retrofit construction techniques and learning how those systems interact in real buildings. We are very excited about this opportunity, and we expect the end result will provide real-world solutions that can cost-effectively reduce building energy use.”


Contact:   Charles E. Praeger
Assistant General Manager
E-mail:    cpraeger@thomasamc.com
Phone:   216.241.7333

______


About MBMA
MBMA has served metal building systems manufacturers and suppliers for 56 years. Its membership represents more than $1.9 billion in annual steel shipments and accounts for approximately 49% of the total non-residential low-rise construction market in the United States. MBMA provides engineering leadership through the many research programs that it sponsors annually, often in coordination with major universities and engineering schools throughout North America. This research is used to improve the performance, efficiency, and quality of metal building systems and to elevate the technology used to produce them.

About ORNL
ORNL is a multi-program science and technology laboratory managed for the U.S. Department of Energy by UT-Battelle, LLC. ORNL's mission is to deliver scientific discoveries and technical breakthroughs that will accelerate the development and deployment of solutions in clean energy and global security, and in doing so create economic opportunity for the nation. It regularly collaborates with industry partners to apply its distinctive capabilities.