Solid Control Mechanical Separation

July 27, 2012 - PRLog -- It is widely accepted that conventional waste drillings separation methods are ineffective and costly processes. To reach high performances at a low life cycle cost, the modern solution for treating these drilling muds combines mechanical separation. Mechanical separation equipment employs mass differences, size differences or a combination of both to selectively reject undesirable solids and retain desirable drilling fluid.  The shale shaker utilizes the vibration force to remove the large solids, the desanders and desilters utilize centrifuge force and mass difference between the solids density and liquid density for solids removal. Each piece of equipment is general limited to the following range of particle removal:you can visit http://www.tr-desander.com/ for more details.

1.Standard shale shaker - 180 microns or larger
2.Fine screen shaker - 74 microns or larger
3.Desanders - 47 microns & larger
4.Desilters - 15 microns & larger

   Correctly implemented each phase of solid control equipment is effective within a certain particle size range. Utilizing all or a combination of the above equipment throughout your drilling program will produce maximum benefits and result in a cost effective means of controlling your solids within an affordable budget.

Contact Information:

Email:   www.trsyjx@gmail.com

            julinliang@trsolidcontrol.cn

Msn :    tr.solid.control@msn.cn

Mobile phone:   8615229262604