TR solid control hydricyclones

July 16, 2012 - PRLog -- Hydrocyclone is made of an upper cylindrical section and a lower conical section. A vortex finder pipe protruding downward at the top of the upper cylindrical section that is a little bit below the tangential feed section. Fluid from centrifugal pump enters the tangential feed section of the hydrocyclone at high velocity on swirling motion creating a centrifugal force that accelerates the solids to the cone wall. The solids and liquid mixture rotates rapidly while swirling downward the higher mass solids move toward the wall and exit  the cone thru its apex while the lighter mass which are concentrated away  from the wall towards the centerline are now forced to reverse direction swirling upward exiting the vortex finder.

pls visit http://www.tr-desander.com/  for details

   TR hydrocyclones are simple mechanical devices, without moving parts, designed to speed up the settling process of solids. Drilling fluid containing solids is fed tangentially into the body of the hydrocyclone, where centrifugal force induced by the flow causes heavier solids to separate from lighter solids. The heaviest solids are discharged out the bottom (underflow) of the hydrocyclone and the lightest solids exit the top (overflow). The separation of solids is dependent upon feed particle size, fluid viscosity, fluid feed pressure (as a function of fluid density) and hydrocyclone size. TR offers you 4 models of hydrocyclones: desanders (12-inch and 10-inch cones) and desilters (8-inch and 4-inch cones). As for each application, will determine the cone configuration and the pump and motor requirements necessary to maximize liquid/solids separation.

Some Features of hydrocyclones
1. Lightweight, durable, polymeric material construction
2. Provides high temperature tolerance, chemical and erosion resistance and low-cost  replacement
3. Wear-resistant ceramic insert molded into the underflow (4-inch desilter)
4. Resists abrasion to a degree many times higher than the standard polymeric material, thus ensuring long-lasting life
5. Skid-mounted installation with lifting eye welded to frame Facilitates safe and easy handling

Contact Information:

Email:   www.trsyjx@gmail.com

            julinliang@trsolidcontrol.cn

Msn :    tr.solid.control@msn.cn

Mobile phone:   8615229262604