Buy Playstation PS3 Break JB2 USB Dongle

Unlock the true potential of your PS3 with JB2USB – keep your PS3 on a homebrew enabled custom firmware, while at the same time enjoying the newest and most popular PS3 games.
By: www.gamezhome.com
 
June 11, 2012 - PRLog -- Buy Playstation PS3 Break JB2 USB Dongle

Unlock the true potential of your PS3 with JB2USB – keep your PS3 on a homebrew enabled custom firmware, while at the same time enjoying the newest and most popular PS3 games.

   #1, Booting of games designed for PS3 system software v3.6 and above
   #2, Runs your existing games and new v3.6+ games from HDD in conjunction with standard backup managers
   #3, Does not require the power/eject trick
   #4, Custom v3.55 Dongle firmware behaves like OFW when jb2usb is not inserted
   #5, Manufactured from highest grade components and Actel based
   #6, Durable and high quality metal case design
   #7, Tough and durable plastic packaging
   #8, Further features to be added as they are developed
   #9, On board 2 MBytes SPI flash
   #10, Supports Fat and Slim PS3 consoles currently running any firmware up to v3.55 and any PS3 which can be downgraded successfully from v3.6+ to v3.55 (NOTE: requires other tools, jb2usb cannot downgrade a console)
   #11, Supports all regions of consoles
   #12, Supports all regions of v3.6+ games
   Rock solid crystal oscillator on board for flawless timing

$23.99 Buy Playstation PS3 Break JB2 USB Dongle # http://www.gamezhome.com/playstation-ps3-break-jb2-usb-do...

How To USE???

JB2USB Identify:
Before you may use JB2USB, you must first install our 3.55-Dongle custom firmware onto your PS3.
Step1. Insert JB2USB into one of the USB ports on your PS3 and power the system up.
Step2. The red LED will light on during the process of PS3 start up. If the JB2USB is identified by PS3, the red LED turn off and the green LED light on; or the red LED light flicker, you must restart your PS3 in this situation.
Note. Do not remove the JB2USB at any point while the PS3 is running.
Blue-ray Disc Game:
Insert disc into PS3, the game will auto start.

HDD Game:
Before you may run HDD games, you must first install MutliMAN.
Step1. Insert USBHDD into one of the USB ports on your PS3,
Step2. Select (game -> MultiMAN) to run MultiMAN,
Step3. Press R1 in MultiMAN’s XMB interface, all games in USBHDD will be displayed.
Step4. Load one game you want, PS3 will back to PS3’s XMB interface automatically. At this time menu (game) -> (app_home/PS3_GAME/) is the entry of the loaded game.
Step5. Select (game) -> (app_home/PS3_GAME/) the game will start up

JB2USB Update:
When there is a new firmware of JB2USB, you should update your JB2USB.
The JB2USB is not only a Dongle of PS3, but also a mass storage device When insert JB2USB into your PC. You can only write data into this mass storage device. The update process includes two stages: file copy and firmware self update.
Step1. Insert JB2USB into one of the USB ports on your PC, a removable device will be enumerated by PC, the name of the device is “JB2USB”. The red LED light on.
Step2. Copy update file into the removable device “JB2USB”. The red LED light flicker until the copy is completed.
Step3. After the entire update file are written into “JB2USB”, the self firmware update start, at this time, both the red and the green LED are light on. The removable device will be uninstalled simultaneously.
Step4. The red LED turns off and only the green LED light on after the update process is completed.
Notes: Insert JB2USB into PC will not display the update file in the removable device.

System update:
Once you have confirmed that you have obtained the correct updater file, proceed with the update as follows:
Step1. Obtain a USB storage device such as a USB HDD or USB flash memory stick,
Step2. Create a folder on the storage device in which to save the update file. Using a PC, create a folder named “PS3” on the storage device. Within the PS3 folder, create a folder named "UPDATE",
Step3. Copy the PS3UPDAT.PUP file to the “UPDATE” folder created in step 2. Thus, you will have this path structure on your USB storage device: PS3UPDATEPS3UPDAT.PUP,
Step4. Boot your PS3 and insert the USB storage device into the PS3,
Setp5. From the home menu, select (Settings) ‐> (System Update) ‐> (Update via Storage Media),
Step6. The PS3 will notify you that the “3.55‐Dongle” update was found. Select OK then follow the onscreen instructions to complete the update,
Step7. After the update has completed, your PS3 will restart and you now be running the 3.55 custom firmware. You may now enjoy the use of the JB2USB.
(NOTE: The above procedure is only applicable to PS3’s on or below system software v3.55)

Install Software:
Step1. Obtain a USB storage device such as a USB HDD or USB flash memory stick,
Step2. Copy the MultiMan_02.xx.xx file to the root directory of USB device. Thus, you will have this path structure on your USB storage device: MultiMan_02.xx.xx,
Step3. Boot your PS3 and insert the USB storage device into the PS3,
Step4. From the home menu, Select (game) -> (Install Package Files)
Step5. The PS3 will display all software in root directory of USB device. Select install MultiMan_02.xx.xx into you HDD.
Step6. After the install completed, the icon of MultiMAN will display at (game) -> (MultiMAN).

More PS3 Dongle # http://www.gamezhome.com/wholesale-ps3-controlattach_c833
End
Email:***@yahoo.com
Tags:Ps3 Dongle, JB2 USB Dongle, PS3 Break JB2
Industry:Games, Business
Location:Lonsdale - South Australia - Australia
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
-Earthbabycart PRs
Trending News
Most Viewed
Top Daily News



Like PRLog?
9K2K1K
Click to Share