Hurricane Wind Power Wind Turbine Technologies LLC of Virginia releases new Micro Hydro Generator

Nov. 15, 2010 - PRLog -- Hurricane Wind Power Wind Turbine Technologies LLC of Virginia has released an new Micro Hydro Generator capable of producing  major power at lower RPM. The dual rotor dual stator unit is capable of charging 24 volt systems at around five hundred RPM  outputting around 50 amps. This is a major improvement over other generators currently on the market.

     The new generators are being geared at 4 or 5 to one producing enough RPM with room to spare to reach a 24 volt cut in allowing the system to be used in grid tie interactive or rural power applications where a bold stream is featured in the land scape. The generators can be wired in series or parallel. The generators have three charging options. Basically with the option to charge batteries, grid tie, or a combination of both.

The new  double rotor double stator systems are based on the popular CAT 5 wind generator system, but have a heavier stator that is able to take advantage of the heavier current and power that is  available in a hydro application. These units are being used with dams, as well as other simpler configurations.

The prototype system used an outback interactive grid tie inverter and the Hurricane waterworks system equipped with a cooling fan and was able to generator around one kilowatt continuous. The new Micro Hydro generators can be seen at:
http://www.hurricanewindpower.com/servlet/the-micro-hydro...

# # #

Hurricane Wind Power Wind Turbine Technologies LLC of Virginia
Hurricane Wind Power has the best wind generators and wind generator parts for the DIY do it yourself wind turbine builder, grid tie made easy with SWEA - Huge inverter selection