Access 8-Channel Model 4515 A/B Switch Via 10/100 Base-T LAN Access or Via Serial Remote Port

Sept. 9, 2010 - PRLog -- Electro Standards Laboratories, Cranston, RI, announces the PathWay® Model 4515 AB network switch. This unique switch allows sharing of a device connected to a single pin of each RJ11 interface port (the COMMON port pin) between two other devices connected to the A and B pins for each port. Remote access via a Web-based GUI interface through 10/100 BASE-T Ethernet connection or via ASCII commands sent to the unit via an RS232 connection.

The switched pins are transparent to all data. Each RJ11 port has (4) active contacts: Normally OPEN; Normally CLOSED;  The WIPER contact of the relay; and a pin for SG (signal ground referenced to the switch unit).

Switch position is controlled remotely via either of two remote control ports: RJ45 10/100 BASE-T Ethernet port, or a DB9/female RS232 Serial port. The Model 4515 features IP Access control of the unit by entering the IP address into a standard Web browser. Serial port remote control by sending ASCII character commands to the unit. Command set allows the user to change position of each port and query the status of each port.

For more detailed information on the Model 4515 8-Channel A/B Single Contact Relay Port Switch, visit http://www.electrostandards.com/ProductDetail/?productid=251. For detailed information on the complete line of copper network switches visit http://www.electrostandards.com/Products-By-Category/?cat.... Electro Standards' staff of knowledgeable sales engineers is available to answer product and application questions: 401-943-1164, eslab@electrostandards.com.

# # #

About Electro Standards Laboratories: Manufactures copper and fiber optic network switches and cable assemblies, interface converters, strain gage indicators, and digital signal conditioners. Designs and installs voice and data networks. R&D engineering services specializing in motor control systems.