Four Main Architectural lighting Forms

Aug. 11, 2010 - PRLog -- Architectural Lighting is a light source installed inside the building or lighting devices, using embedded, reflective surfaces of buildings or through the light. Here are four main forms:

Panel-style lighting. That is installed in the roof or dome led panel lights(http://www.ledlightchina.com/products.asp?bid=2). It is suitable for hall, restaurant, lobby and other places, it is particularly luxurious. A panel in the Milky Way above the light bulbs installed, there will be balls or fluorescent light bulb hanging in the center, reflected by the ceiling to lighting methods.

Eaves board lighting. The ceiling and walls in the corner, down Fangfa Guang installed lighting. This lighting will make the walls and curtains lighting from top to bottom to form a beautiful bright band of light. In addition, against the wall of the sofa can also be sufficient illumination. In order to not directly see the lamp, should pay attention to shading, shading angle greater than 45 °

Balance the lighting. That is installed in the upper wall lighting. Reach all parts of the ceiling above the light to illuminate, shines under the light to illuminate the curtain. The fascia board is the light only shines light below. This so called "balance of lighting" because so light to the upper and lower sides. But small time intervals from the ceiling (25mm or less), partial roof will become light, it should be noted.

Niche lighting hole. The light source hidden in the recesses, this approach include the provision of centralized lighting panel lighting fixtures for round, square, rectangular metal box, installed in the ceiling or wall.

# # #

The main products include LED spolight, LED bulbs, LED panel light, LED downlight, LED wall washers, LED fluorescent light, LED grow light, LED strip light and so on. Products are widely used general indoor or outdoor lighting decoration, industry and architecture lighting, stage lighting etc.