How To Choose Gateway 1100 AC Adapter

May 24, 2010 - PRLog -- Before you are ready to purchase an Gateway 1100 AC Adapter you should make sure that the Adapter will give you the correct voltage and suitable current output. The correct methods of using and maintenance Gateway 1100 AC Adapter operation are: first AC adapter DC output plug into the notebook’s power jack, and then put into the AC input plug on 220V AC power outlet; and should be unloaded first when the AC input plug unplug, And then pull out the DC output plug.

The Voltage must be within 10% of your original Gateway 1100 AC Adapter (http://www.udtek.com/gateway-pcs-gateway-solo-1100-ac-adapter-65w-19v-342a-5525-3prong-p-48130.html)Voltage. The Amps may be higher but they cannot by lower. If you are purchasing a universal ADP-65HB  Adapter  or Car Charger you will need to work out the Watts of your original Gateway 1100 AC Adapter and select the universal Gateway 1100 AC Adapter or Car Charger with the same Watts or next highest Wattage.

If the plug (unloaded) when reversing the sequence of the adapter will communicate Department unlade state, are not allowed to communicate Department adapter no-load state, for his work on the pulse, and no-load when the switch transformer windings to generate highly anti-peak voltage breakdown, such as IC, capacitor, such as ac adapter voltage-sensitive components. Although the current AC adapter has been set up its no-load protection circuit, but because of the design is required to look up to other problems, such protection circuit protective effect is very limited. To find out the voltage & current, turn your notebook over and look for a label, sticker or writing which shows the voltage and current, it should look something like the examples below.

The voltage figure will have a “V” after the number i.e 19V and the current will have a “A” or “mA”. i.e 3.15A. You can also find these shown on your original Gateway Gateway 1100 AC Adapter if you have it. You can work out the Wattage by multiplying the Voltage by the Amps i.e 20V X 3A = 60 Watts. There is no 60 Watt Acer Gateway 1100 AC Adapter so you will need to select the next step up which is the 70 Watt Gateway 1100 AC Adapter. PLEASE NOTE: If the wattage requirement for your notebook is lower than the 60W or 90W output of the adapter, it will not damage your notebook, your notebook will only take the amount of power it requires. I.E.

If your notebook needs 45W, then either the 60W or 90W will work OK. If your notebook needs 80W then you will need the 90W one as the 75W one will not be powerful enough. If in doubt please email us on our contacts page. Once you have selected you Brand and Model from the Search Wizard it will display the compatible Gateway 1100 AC Adapter (http://www.udtek.com/gateway-pcs-gateway-solo-1100-ac-ada... the product column. Once you have clicked on the battery you will be redirected to the page displaying allot he information about the Gateway Gateway 1100 AC Adapter. Click on the photo of the Gateway 1100 AC Adapter to enlarge the image and view the tip dimensions to ensure they are similar to your original Gateway 1100 AC Adapter tip dimensions.

# # #

Wholesale Laptops Accessories-Laptop Battery,AC Adapter,Keyboard,LCD Adapter,Car Charger,Universal Power : Udtek Laptop Accessories