Delta Electronics Cliq DC Power Supplies Now available in the UK

PR Log (Press Release) – Aug 14, 2009 – Delta Electronics High Quality Cliq 24V dc , DIN rail Power Supplies for control panels and systems.

The product offers a nominal output voltage of 24V, a wide temperature range from -20°C to +75°C and a minimum holdup time of 20ms. The state-of-the-art design is made to withstand harsh industrial environments.
The rigged, ultra-compact case material is shock and vibration resistant according to IEC 60068-2. The power supply provides overvoltage, overload and thermal protection. The wide input voltage ranges from 85 to 264VAC (1 phase) and 320 ~ 575VAC (3 phase), and the multiple terminals provide for fast wiring and easy installation.
                                                                                                   
Features

+ Easy Wiring
Adopting standard M3/M4 terminals and standard TS-35/7.5 or 15 DIN rail installation.

+ Enhanced Security Level

+ Overload Protection
CliQ series power supply offers overload protection (OLP/OCP) to prevent damage resulting from overcurrent. When the rated current is higher than 150%, the output voltage will start to drop automatically. When the power exceeds the maximum limit and reaches UVLO (under voltage point), the power supply will enter the bouncing mode. Once the overload is eliminated, the output voltage will return to its normal volume.

+ Overvoltage Protection
When error occurs in the feedback device inside the power supply, the overvoltage protection (OVP) will force the power supply to enter level 2 output (30 ~ 32VDC) and the output voltage will be lower than 35V. After the error is eliminated, the output voltage will restore to 24V automatically.

+ Short Circuit Protection
When short circuit occurs at the output voltage terminal, the short circuit protection will force the power supply to enter the bouncing mode until the fault is eliminated.

+ Thermal Protection
When the overcurrent or overvoltage persists for a period of time and causes high temperature, the thermal protection will force the power supply to enter the bouncing mode until the fault is eliminated.

+ RoHS Compliant

+ Redundancy: Yes (with external oring diode)

+Output Voltage Adjustment
The output voltage is 24VDC, which can be adjusted from 22V to 28VDC on the potentiometer ADJUST on the front panel of each power supply.

+ Expected Lift Time: 10 years

+ Warranty: 3 years

+ Surge Load
The power supply is capable of enduring 3 seconds of a surge load of 150% of output voltage ±5% of regulated limit.

+Dynamic Load
The power supply is capable of accepting a dynamic change of load from 0% to 100% with output voltage ±5% of regulated limit.

+Start Up Current, Hold Up Time & Rise Time