Versatile Mold uses a process known as EDM which very quickly burns into pre-hardened steel, allowing for very precise, difficult shapes to be cut into the core and cavity of a tool. If the carbon electrodes are correct, the tool will be correct. Verifying the electrodes are correct before wasting a $10,000 block of steel seemed to be a perfect method to guarantee quality before any chips flew.
Using a Laser Design SURVEYOR® 3D Laser Scanning System (accurate to 0.011mm), each carbon electrode is scanned and compared with the perfect CAD model, complete with exacting burn allowance, draft and all features. The SURVEYOR also is ideal for First Article Inspections of parts from the tool, speeding up the time to market.
One advantage of using this process was to assure that in the case of multiple cavities, each set of electrodes matches. Martin simply scans each set and compares the two scans using Geomagic Control Inspection software. By using Geomagic Reverse Engineering software, changes in the tooling can also be done quickly, with a modified CAD model of the changed electrode complete and verified.
Versatile Mold, located in Rutledge, GA, between Augusta and Atlanta, is clearly a center of modern day 3D Imaging technology innovation. Using Laser Design 3D scanning systems, Martin and Whitaker were able to succeed in the challenge set before them of distinguishing the company from its competitors.
For more information, contact Laser Design Inc. – Ph: 952-884-9648, Email: firstname.lastname@example.org or visit http://www.laserdesign.com/
About Versatile Mold
Versatile Mold is a full-service molding facility capable of providing support through all phases of the molding process, from design to mold sampling with expertise in engineering thermoset, thermoplastic injection, compression, injection-compression, and transfer, as well as general machining and refurbishment. http://www.versatilemd.com
About Laser Design Inc.
Laser Design Inc. has been a leading supplier of high-accuracy 3D laser scanning systems since 1987. The company’s 3D scanners are used by Fortune 500 companies and other leading manufacturers worldwide for Inspection and Reverse Engineering applications. http://www.laserdesign.com