The SurgeGuard K1-Series and T1-Series is based on a multiple gas discharge tube design with serviceable replacement elements. The PTR7AF7AFxxK1 and T1 arrestors measure 119mm x 45mm and have 7-16 female to 7-16 female connectors.
The K1-Series product voltage ratings can range from 1.4kV to 3.5kV, and have a nominal impedance of 50 Ohms. This allows the K1 to pass up to 30kW or more of RF Power.
The robust SurgeGuard T1-Series, available in multiple voltage ratings (90V to 1000V), provides a 250x multiple strike capability @ 10kA and a 100kA (8 x 20μs) one time surge capability. For 7/16 DIN applications <1GHz, this device provides a long surge lifetime with its 5 replaceable GDTs.
Additional specifications for both models include excellent lightning transient protection performance using a multiple GDT design, low VSWR of 1.20 typical, and Insertion Loss of only 0.1dB typical. All SurgeGuard products use only top-rated materials and superb construction, with both units also waterproof and dustproof (tested and qualified to IP68 Standard).
The K1-series and T1-series of lightning arrestors are currently available directly from Nextek. For more information or a datasheet with complete product specifications, visit www.nexteklightning.com for more information.
Photo:
http://www.prlog.org/




