The Rackmount Storage Systems come with a RAID controller interface which provides up to 240MB/sec single-link transfer rate and greater than 2TB per volume. Dual mini-8088 ports work for server / application failure clustering. The unique 1 to 4 SAS octopus cable, which is optional, lets server connect up to 4 x DAS subsystem via parallel to aggregate multiple RAID subsystem and stripe them in the operation system.
Certain systems come with 16 hot swappable SATA-II HD bays. These types of drive bays are rare, because this typically means that they are “removable”
The RAID support level can range anywhere from 0, 1, 10, 3, 5 and even JBOD. It can be multiple RAID sets which includes an array roaming, online RAID capacity expansion and RAID level migration simultaneously. The RAID configuration and firmware can be via through on-board RS-232 / RJ-45 port.
This 3U chassis can be mounted to a 19" rack cabinet which always has an option for slide rails. These slide rails provide more protection to the unit by allowing the unit to be able to slide perfectly into the 19” rack cabinet to keep from water and dust damage. It has an embedded SMTP manager monitor with an all system event and allows each user to access this RAID system remotely through its on board RS-232 or RJ-45 LAN port.
Our product line configurations are illustrated on our web site http://www.acnodes.com. To find out more about Rackmount storage system, visit http://www.acnodes.com/
In Acnodes, we manufacture and deliver a full line of Industrial Computer solutions that enhance and optimize user work performance. Committed to accommodate a variety of ever-changing environments, Acnodes is quick to insert state-of-the-
# # #
In Acnodes, we manufacture and deliver a full line of Industrial Computer solutions that enhance and optimize user work performance. Committed to accommodate a variety of ever-changing environments, Acnodes is quick to insert state-of-the-


