Prototype Injection Molding, Thermoplastic Injection Molding, Injection Molds

July 14, 2008 - PRLog -- Hobart, Washington USA

The Prototype Injection Molding and Injection Molds Services is a new webpage that was just added to the new Rapid Prototyping Information Website that has just been released. This new Prototype Injection Molding Process webpage has all of the information you need to know on Injection Prototyping and Thermoplastic Injection Molding and the main information you need to know on Prototype Injection Molding. You can visit this Thermoplastic Injection Molding Services webpage at: http://www.prototypezone.com/plastic-injection-molding/

Here is an excerpt from the new Thermoplastic Injection Molding and Molds webpage:

“Rapid Prototyping is the process of automated manufacturing of physical components using solid freeform fabrication. They are used in a wide range of applications, everything from medical to fine art. Rapid Prototyping machine works by taking virtual models from software and then converting it into extremely thin, horizontal cross-sections and then goes onto create each of the cross-section in physical space in a cyclic manner until the model is completed. Rapid Prototyping is a WYSIWYG process in which the virtual model bears identical resemblance to the finished physical model. Additional fabrications allows the machine to lay down layers of sheet, liquid or powder material and build up a series of cross-sections These layers are finally automatically fused together to render the final product.

The main advantage of rapid prototyping is the ability to create any shape no matter how complex the geometry is. The commonly used data interface between the machine and the software is the STL format. It works by approximating the geometry of a part using triangular facets, smaller the facets higher will be the surface quality. The word “rapid” is used relative top conventional methods which take days to construct a model depending upon its complexity.  Rapid prototyping can create the model within a few hours, though it is highly dependent of the type of machines and the size of the model. There have been several new technologies available for rapid prototyping including Fused Deposition Modeling, Selective laser sintering, 3D printing, and Electron Beam Melting.”
   
The new Thermoplastic Injection Molding page is free information to members and non-members and can be found at:  http://www.prototypezone.com/injection-molding/. However, users of Prototype Zone who decide to be members can join for free and receive two free E-Books on Rapid Prototyping for a limited time offer. Prototype Zone will be adding new information all the time on Rapid Prototyping so check back often in the forum and blog for the latest information at:  http://www.prototypezone.com/plastic-molds/

About Prototype Zone: Prototype Zone is the leading information source and community website for all things about Prototyping and Rapid Prototyping. Visit the website to join for free and receive two free ebooks on Rapid Prototyping for a limited time offer.