NXP LPC1768 Cortex-M3 Evaluation Board

Dec. 30, 2009 - PRLog -- The LPC1768 evaluation board is based on ARM Cortex-M3 processor from NXP, its operating frequency is up to 100MHz, with 512KB high-speed on-Chip Flash Memory and 64KB RAM, together with  a wide range of peripherals like a colour QVGA LCD, Ethernet, USB, CAN, SD/MMC card interface, and UARTs, etc. The plenty of example programs for this board will help you get familiar with the full functions of the lpc1768 processor and speed up the development of your project.

Hardware Features:
- Include one 2.4" TFT LCD (240*320)
- NXP LPC1768, based on ARM Cortex-M3 Core, 100MHz
- 512KB internal flash and 64KB SRAM
- XTAL Frequency: 12 MHz
- Two RS232 Interfaces
- Two CAN Interfaces
- One 10/100M Ethernet Interface
- One ETM Interface
- One Micro SD Card Interface
- One USB Device Interface
- One USB Host Interface
- One USB OTG Interface
- One 20pins JTAG Interface
- One 10pins Cortex Debug Interface
- One 18pins Cortex Debug Interface
- One TFT LCD Interface
- One Joystick with 4-direction control and selector
- One Analog Output (connected to speaker by default)
- One Analog Input (connected to potentiometer by default)
- Supply Voltage: 5V DC (provided by the USB bus of a PC)
- Supply Current: 65mA typical, 120mA maximum
- Board Size: 119mm x 119mm (4.68" x 4.68")

Packing List:
1.  One Embest LPC1768 ARM Cortex-M3 Board
2.  One RS-232 Serial Cable
3.  One USB Cable   
4.  One RJ45 Ethernet Cable   
5.  One 2.4" TFT LCD Panel, 240X320

More Information about this lpc1768 board could be found on our website: http://www.embedinfo.com/en/list.asp?id=39.

# # #

Embest CO., LIMITED, established in March of 2000, is a global provider of embedded hardware and software. Embest aims to help customers reduce time to market with improved quality by providing the most effective total solutions for the embedded industry.