Click to Share
 

Gao Press Releases

+ Alert
+ Feed
Exclusive News
Topics Locations Industries Dates

By UC Berkeley Center for Family and Community Health
After procrastinating for almost ten years, the FCC seems prepared to review its outmoded wireless radiation standards. But will industry force the FCC to maintain the status quo or even weaken the inadequate standards?
By UC Berkeley Center for Family and Community Health
Comments on the 2012 GAO Report: “Exposure and Testing Requirements for Mobile Phones Should Be Reassessed” Joel M. Moskowitz, Ph.D.
By Bankruptcy Creditors' Service, Inc.
BCSI reports on latest events arising in the chapter 11 cases commenced by Delphi Corp.
By Perry Keller
This high voltage evaluation board is commonly used in applications such as digital motor or machine control, packing mechanisms, UPS, VFC (variable frequency control) and electrical control.
By Perry Keller
This handheld datacom transmission analyzer has multiple measurement functions including service-interrupt error testing, online error testing and 2Mbit/s unframed error performance testing.
By Perry Keller
It measures signal amplitude at a specific frequency or any defined carrier. This handheld signal level meter performs C/N measurement, voltmeter functions, spectrum analysis, auto test and data logging.
By Perry Keller
This tester is used to carry out both framed and unframed tests on various equipment such as primary multiplexers, digital cross connects, automatic protection switches and circuits operating at a speed between 50bit/s and 2048kbit/s.
By Perry Keller
The board offers code for testing CCS, PWM, ADC, SPI, SCI, CAN communication, FFT, DC brush/brushless motors and AC motors SPWM and SVOWM.
By Perry Keller
It saves test time and decreases potential errors due to its ability to automatically recognize wavelengths.
By Perry Keller
This RFID reader module kit, model 713002, is used with RFID tags compliant with the ISO 15693 standard, which are also known as Vicinity Cards.
By Perry Keller
It handles multiple devices such as Programmable Read-Only Memories (PROMs), Programmable Logic Devices (PLDs), flash microcontrollers and serial and parallel memories.
By Perry Keller
The DSP emulator pod, model XDS510PP, supports bi-directional ECP and EPP transfer and offers hardware detection in the event of power failure or cable disconnection.
By Perry Keller
This evaluation board is suitable for such applications as digital motor or machine control, packing mechanisms, UPS, VFC (Variable Frequency Control) and electrical control.
By Perry Keller
TI F2812 DSP Evaluation Board Compatible with NE2000
By Perry Keller
It provides testing code for testing CCS, PWM, ADC, SPI, SCI, CAN communication, FFT, DC brush/brushless motor and AC motor SPWM and SVOWM.
By GAO,Emulator,Supports,Debugging
It operates in conjunction with TI Code Composer Studio IDE debug tool. T
By Perry Keller
Its hot-pluggable design provides great convenience for installation, maintenance and operations.
By Perry Keller
This meter supports Level, V/A, Tilt and Trunk Level testing and can test two channels simultaneously. It also provides fast and accurate measurement of CATV signals.
By Perry Keller
It features a high programming speed, test vector capability, a multi-array fuse map editor, and poor-pin-contact check upon device insertion.
By GAO,Programmer,Supports,Universal
It tests TTL/CMOS logic IC devices and dynamic or static access memory devices as well as Programmable Read-Only Memory (PROM), Programmable Logic Devices (PLD), flash microcontrollers and serial or parallel memory chips.
By Perry Keller
The board uses an independent power supply for A/D sampling, which effectively reduces electro-magnetic interference (EMI) to the computing unit.
By Perry Keller
It features a compact size, plug and plug set up for easy installation, high operating speed and multi-DSP emulation. This emulator runs under Windows 98, NT, 2000 and XP operating systems.
By Perry Keller
The versatile IPTV tester tests network performance metrics and verifies network configurations in xDSL networks.
By GAO,Performance,Evaluation,Clearance
It features on-chip flash program memory, on-chip and extended SRAM, a CAN 2.0 interface and 2kbit serial EEprom.
By Perry Keller
The ITU-T G.728 standard specifies the encoding of 8kHz sampled speech signals for transmission over a 16kbps channel.
By Perry Keller
It is intended for high performance Digital Motion Control (DMC) systems and is used to evaluate extended keyboard and display panel interfaces of TMS320F2812 chipsets. Its price has been reduced to US$145.00 for a limited time.
By Perry Keller
The softwIt supports bi-directional ECP and EPP transfer and offers hardware detection in the event of power failure or cable disconnects.
By Perry Keller
GAO's modem software support most commercial analog front ends (AFE) as well as various discrete DAAs with codecs depending on the application.
By GAO,Fax,over,Software
It is fully compliant with ITU-T T.38 fax relay specification and supports commonly used processors such as TI C5000 & C6000 series DSPs.
By Perry Keller
The software supports commonly used processors such as TI C5000 & C6000 series DSPs, ARM processors and ADI DSPs and OS such as Windows and Linux.

Page:
Page updated every 10 minutes


Like PRLog?
9K2K1K
Click to Share