Follow on Google News News By Tag Industry News News By Location Country(s) Industry News
Follow on Google News | ![]() Zenith Offers Tips to Removing Vinyl Siding in Time for Winter SeasonBy: zenithbydanco It is advised to complete this DIY project when the weather is decent. Rain, windy, or freezing weather can make replacing vinyl siding difficult due to extreme conditions. Tips for Removing Vinyl Siding - Wear protective gear such as long sleeves, close toed shoes, goggles, and gloves to protect yourself from any sharp edges, splinters, and nails. - When removing vinyl siding make sure to have the necessary tools handy!
- The Zenith Trim Puller by Danco is designed to get any DIY job done quickly without damaging materials involved. The Trim Puller is constructed to provide hand comfort and control while working with it. The EDPM handle is easy to grip and offers shock-absorbing protection. - For hard to reach high areas, use a ladder for easier reach. Then, place the Trim Puller beneath siding and slide the tool between two pieces of siding and apply pressure to pry apart hooked pieces. Once the two pieces of siding are disconnected, slide the tool left to right to separate the siding from the wall. These steps will need to be done from top to bottom of vinyl siding planks to completely remove. - Beware of anchoring nails attached to siding to hold siding in place. Nails can also be removed using the Trim Puller! The Zenith by Danco Trim Puller contains two integrative nail pullers to easily extract nails. - Have a plan in place for disposal or reuse. Vinyl siding is a recyclable material. Instead of tossing it into a landfill, we suggest finding ways to reuse, recycle, or sell the materials for second-hand usage. - Now you're ready to replace siding and give your home the ultimate upgrade ahead of the winter season! The Zenith by Danco Tools Trim Puller is available at major retailers such as Amazon, the Home Depot, and Lowes. For more information, please visit: https://www.zenithbydanco.com/ End
Page Updated Last on: Oct 31, 2022
|
|