News By Tag
News By Place
Follow on Google News
USB 3.1 Device & Host Controller IP Cores Is Available For Immediate Licensing!
USB 3.1 Device & Host Controller IP Cores With Highly Configurable Design For Superspeed Data Transfers In All Kinds Of SoCs Is Available For Immediate Licensing!
By: T2M UG
USB 3.1 Host and Device Controllers are highly configurable IP Cores that can be interfaced with any third-party USB 3.1 PHY IP Core. The Controller IP Cores are compliant with USB3.1 specification and are architected to include a High-Performance DMA Engine based on xHCI Specification. These IP Cores can be configured to support full-fledged xHCI implementations for use in standard PCIe-USB bus adaptors/chipsets or be configured with a subset of features for embedded applications requiring limited host functionality.
USB 3.1 Host Controller IP exposes either a AXI or AHB Master Interface for the Datapath and an AHB Slave Interface for Register Access. USB 3.1 Host Controller IP Core can be configured to support all types of USB transfers – Bulk, Interrupt and Isochronous and allows dynamic configuration to support configurable number of endpoints, interfaces, alternate interfaces, and configurations. USB 3.1 Host Controller IP Cores can be configured to support any combinations of USB 3.1 interface speeds – SSP (10 Gbps), SS(5 Gbps), HS (480 Mbps), FS(12 Mbps) and LS(1.5 Mbps) with support for all low power features of the USB Specification supporting Suspend and Remote Wakeup.
The USB 3.1 Device Controller IP core is carefully partitioned to support standard power management schemes which include extensive clock gating and multiple power wells for aggressive power savings required for mobile and handheld applications. This controller has a very simple application interface which can be easily adapted to standard on-chip-bus interface. The USB 3.1 Device Controller IP Core implements an aggressive Low Power Management and configurable system clock frequency. Its Layered architecture allows for Bulk Streaming. It also boasts configurable PIPE Interface: 8, 16, 32 bit with optional support for Type-C connectors.
The USB 3.1 Host and Device Controller IP Cores has been silicon proven in Graphics Controller, Flash Storage Controllers, SATA Bridges with support for Bulk Streaming, Embedded Hosts, Docking Stations, Mobile Application Processors, Smart TV, Hubs.