IPA Vapour Dryer – Refurbishment and Upgrade Programme. Maintains the validated process

Layton Technologies comes to the aid of a world renowned manufacturer within the semi-conductor industry. Replacing vapour IPA vapour dryers in their wet-bench processes.
 
 
Layton website_IG-200-Type---Door-Open
Layton website_IG-200-Type---Door-Open
 
Spread the Word
Listed Under

Tag:
IPA Vapour drying

Industry:
Manufacturing

Location:
Stoke-on-Trent - Staffordshire - England

STOKE-ON-TRENT, England - Nov. 28, 2018 - PRLog -- A world-renowned manufacturer within the semi-conductor industry is using five IPA vapour dryers in their wet-bench processes.

These vapour dryers are all in excess of 20 years old and contain numerous obsolete parts which have caused increasing down-time and bottlenecks in production for the manufacturer.

The original manufacturer of the vapour dryers is no longer trading, and this had left the semi-conductor company with the potential for a lengthy interruption in production should a breakdown of a vapour dryer occur.

Such a break in manufacturing of semi-conductors has the potential to cost many hundreds of thousands of US Dollars in lost production.

As the process they run during the manufacture is validated not only in terms of the processes run but also the equipment used, they approached Layton Technologies to discuss the possibility of having a roll-out programme to refurbish the five systems.

Layton dismantled each system in turn and replaced all obsolete components with modern, up to date parts.  This included the out of date plc and HMI to make it compatible with modern programmes and control systems.

The original, exceptionally delicate, quartz tanks and quartz cooling coils, heating pads, operating procedures and the system carcase were all reused in the refurbished system to maintain the validation features necessary to allow the Dryers to be re-introduced into the wet-benches without lengthy and costly re-validation being required.

As each system was refurbished it was shipped back out to the customer, re-installed in the wet-bench. Once the wet-bench was running again the next dryer was removed from the line and sent to Layton for the same refurbishment to be done.

Over a period of eight months all five systems were fully overhauled and re-installed at the customer's facility with minimum interruption to their manufacturing schedule.

The customer was so impressed with the standard of work that they have subsequently ordered a new IPA Vapour Dryer which will shortly undergo their extremely stringent validation processes to allow them to purchase further new IPA Vapour Dryers in order to future proof their production.

For more information contact Layton Technologies www.laytontechnologies.com +441782370400

marketing@laytontechnologies.com

Contact
Vikki Breese
***@laytontechnologies.com
+44 (0) 1782370400
End
Email:***@laytontechnologies.com Email Verified
Tags:IPA Vapour drying
Industry:Manufacturing
Location:Stoke-on-Trent - Staffordshire - England
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Layton Technologies PRs
Trending News
Most Viewed
Top Daily News

Most Viewed
Top Daily News
PTC News

Nov 28, 2018 News



Like PRLog?
9K2K1K
Click to Share