News By Tag
News By Location
Garage Door Repair Phoenix Loyal Doors
By: Loyal Doors
Some people open their garage door several times a day. Others may only open it every few weeks. Regardless of the frequency, it is important to perform regular maintenance to keep it running efficiently and safely. Here are a few easy checkups and tests to ensure that the opener stays problem-free.
Knowing what type of garage door opener will ensure the right tools and information are used. There are generally three types of openers, differentiated by what kind of drive they use. The most common type is the chain drive. A belt drive operates similar to the chain drive system, but use a rubber belt instead. A screw drive uses a threaded steel rod to open and close the garage door. These systems have fewer moving parts, so less maintenance is required in most cases.
Check your owner's manual if you're not sure what type of garage door opener you have just by looking at it. If you the owner's manual is unavailable, some manufacturers have their manuals online. The brand and model number of your opener should be on the side of the opener.
There are three basic maintenance steps to perform. The first is to inspect the opener. First, stand inside your garage with the garage door closed. Closely look at all the components of your opener, including cables, springs, hinges, and pulleys for obvious signs of significant wear or damage. If something doesn't look or sound right, it is a possible sign that it needs to be repaired or replaced. By detecting it early, bigger problems may be avoided at a later time. When searching for garage door repair Phoenix Loyal Doors (http://www.loyaldoors.com) does it right the first time.
Next, tighten screws and bolts on a garage door opener, which can loosen after extended use. This is especially true with chain-drive systems.
Lubrication is the next step. Keeping the many moving parts of garage door openers running smoothly requires periodic lubrication, especially the rollers, springs, hinges, and tracks. Proper lubrication requirements may vary between models and types. Check your owner's manual for the correct procedures and products for a specific opener.
There are a few tests to perform to make sure the opener is in peak form. One of these tests is the force test. With the garage door completely open, press the transmitter or wall button to close the door. As the door closes, hold the bottom of the door open with your hands. If the garage door doesn't easily reverse, the force setting on the opener is too high and needs to be adjusted. Check the owner's manual for instructions on how to adjust the force sensitivity.
Then there is the balance test. Close the garage door and disconnect the automatic opener. Manually lift the garage door to three to four feet off the ground. The door should lift smoothly without much resistance and remain open. If that doesn't occur, the door may be out of balance, which can excessively strain the garage door opener when it's opened or closed. A garage door repair professional is needed correct the balance of the door.
For an outstanding garage door repair Phoenix (http://loyaldoors.com/