Daily maintenance for drilling fluids shale shaker

Shale shaker is a very important equipment in solids control system, knowing shale shaker's maintenance methods not only improve work efficiency but also can save your cost greatly.
By: Aipu solids control
 
XI'AN, China - Jan. 6, 2016 - PRLog -- Drilling fluids shale shaker operation

1. It is better to alternately use two sets shale shaker so that we can improve service life of the bearing, screen and other parts.

2. Clean screen in time when stopping work, and with the brush clean drilling fluid on the screen and embedded sand in the screen mesh.

3. During operation, if it is found that the drilling fluid paste network phenomenon, we should be stopped screening immediately and do the washing. Prohibit using shovels and hard cleaning the screen, otherwise it will damage the screen cloth.

http://www.aipusolidcontrol.com/html/products/shale-shaker.html

Drilling fluids shale shaker maintenance

A complete of maintenance system is difficult to unite, it must be made based on drilling team specific circumstances. But the following maintenance contents should be carried out.

1. Add butter to grease cub every day. Inspect the screen box side boltregularly, if loose, fasten immediately.

2. When lifting, prohibit stamping and smashing screen, during transportation it is forbidden to store any items on screen.

3. Before lifting and transporting, the screen box and the base must be fixed by bolt to prevent violent vibration and off of screen box

4. Belt tension is appropriate, when stopping, should always check the tightness of the belt, timely adjustment.5. Generally the belt pulley of the motor and the vibrating shaft is made of cast iron, they are connected to the end of the shaft by means of the cone sleeve. When loading and unloading, prohibit hitting strongly, in case of broken.

5. In the process of drilling fluids shale shaker has stopped running.

Since the drilling fluids no cycle for a long time, the viscosity is as high as 100 seconds or more. At this time we should open the straight line valve of drilling fluid into inlet screen, and at the same time to close the plate of shale shaker entrance to prevent high viscosity drilling fluids blocking screen.If the board is not closed tightly to lead to drilling fluid into the screen, should clean screen in time.

http://www.aipusolidcontrol.com/html/products/shale-shake...

Contact
Phoebe
phoebe@apmudequipment.com
+86-2963611978
End
Source:Aipu solids control
Email:***@apmudequipment.com Email Verified
Tags:Shale Shaker, Solids Control. Shale Shaker, Drilling fluids shale shaker
Industry:Manufacturing
Location:Xi'an - Shaanxi - China
Subject:Companies
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Aipu Mud Equipment PRs
Trending News
Most Viewed
Top Daily News



Like PRLog?
9K2K1K
Click to Share