- Feb. 19, 2014
-- Turner Designs is very excited to introduce our newest major product, ICAM, an in situ
Integrating Cavity Absorption Meter. Factory configured with nine (9) wavelengths from UV (365nm) to Red (676nm), ICAM enables absorption measurements over a wide spectrum. The patented integrating cavity design means that little or no scattering correction is needed. Built with solid-state optics and electronics, ICAM provides excellent reliability with low power requirements in a relatively small package – only 31” (79 cm) long, 7” (18 cm) diameter and weighing 33 pounds (15kg) in air. Absorption can be measured from 0.001 m-1
to a maximum of 15 m-1
. Data can be collected at a maximum rate of six (6) data lines per second using the ICAM GUI. Alternatively, data can be logged internally and output over RS-232 at a maximum rate of one (1) data line per second. Each data line recorded will have a date/time stamp and may contain up to nine (9) absorption values depending on the wavelengths selected. ICAM enables absorption measurements of water systems to generate data that are used in modeling to help with bloom predictions, water mixing or transport, and satellite imagery as well as plant physiology, laboratory research and wastewater monitoring.