The most popular decanter centrifuge type in Nigeria market

Aug. 1, 2013 - PRLog -- Nigeria is a good market for waste management. As many drilling contractors have business in the area and some drilling contractor don’t take care of the environment, the environment in some part of Nigeria is very much polluted. So the government takes action on this and waste management is coming.  

http://www.gnsolidscontrol.com/decanting-centrifuge/

If waste management process, decanter centrifuge is most common equipment used to separate drilling cuttings and drilling fluid. Now the most popular decanter centrifuge type in Nigeria is Swaco CD518HV and GNLW363VFD

1. Mi-Swaco decanter centrifuge, Swaco CD518HV

The CD518 HV, compared with the old model, field tests in fact show that the new model delivers a greater performance than two standard units combined since it increases processing capacity and improves solids separation. The available power for both main and back drive is increased (main from 18.5 to 37kW and back from 7.5 to 11kW) as well as the internal diameter of the liquid discharge.

CD518 HV with technical parameters as below:

Dimension (L*W*H): 3022*1778*866mm

Bowl diameter: 14’’ (356mm)

Bowl length: 56’’ (1422mm)

Material: Stainless steel

Screw protection: Tungsten carbide scroll points

Typical Bowl speed: 1900~3250 rpm

Water capacity:  250GPM

2. GN Solids Control decanter centrifuge, GNLW363VFD

This model is equal to Swaco CD518HV. Compared with Swaco CD518HV, GN decanter centrifuge has below advantages:

(1) Cost-effective, GN centrifuge has the equal working performance with Swaco 518. But the price is much lower than that. So if the customer buy from GN , they can save lots of money.

(2) After sales service: Many companies don’t offer engineer for equipment commissioning. But GN can offer professional engineer to your jobsite once request.

Besides, GNLW363VFD with technical parameters as below:

Dimension (L*W*H): 3100*1599*1884/1434(Height adjustable)

Bowl diameter: 14’’ (360mm)

Bowl length: 50’’ (1270mm)

Material: Stainless steel 316

Screw protection: Tungsten Carbide Tiles

Typical Bowl speed: 0~3200rpm

Water capacity:  250GPM

GN Solids control is the most professional solid control equipment manufacturer from China and only GN can make decanter centrifuge and vertical cutting dryer at present. If you have any requirement, please contact GN Solids Control Co., Ltd.

http://www.gnsolidscontrol.com/